WLED/usermods/quinled-an-penta/quinled-an-penta.h
Andy Hofmann cd95abb2a1
Usermod quinled-an-penta: Updated IOs for v1r1 release (#2429)
* UM QuinLED-An-Penta: First version

* UM QuinLED-An-Penta: Made OLED seconds a setting; small improvements

* UM QuinLED-An-Penta: Fixed unique ID

* Merge branch 'master' of https://github.com/Aircoookie/WLED

* UM QuinLED-An-Penta: Fixed config loading

* UM QuinLED-An-Penta: Replaced ledcRead() with calculating the percentage

* UM QuinLED-An-Penta: Fixed temp sensor readings

* UM QuinLED-An-Penta: Removing OLED bus clk setting

* UM QuinLED-An-Penta: ETH support, lots of OLED improvements

* UM quinled-an-penta: v1r1 adjustments
2021-12-20 01:41:37 +01:00

755 lines
28 KiB
C++

#pragma once
#include "U8g2lib.h"
#include "SHT85.h"
#include "Wire.h"
#include "wled.h"
class QuinLEDAnPentaUsermod : public Usermod
{
private:
bool enabled = false;
bool firstRunDone = false;
bool initDone = false;
U8G2 *oledDisplay = nullptr;
SHT *sht30TempHumidSensor;
// Network info vars
bool networkHasChanged = false;
bool lastKnownNetworkConnected;
IPAddress lastKnownIp;
bool lastKnownWiFiConnected;
String lastKnownSsid;
bool lastKnownApActive;
char *lastKnownApSsid;
char *lastKnownApPass;
byte lastKnownApChannel;
int lastKnownEthType;
bool lastKnownEthLinkUp;
// Brightness / LEDC vars
byte lastKnownBri = 0;
int8_t currentBussesNumPins[5] = {0, 0, 0, 0, 0};
int8_t currentLedPins[5] = {0, 0, 0, 0, 0};
uint8_t currentLedcReads[5] = {0, 0, 0, 0, 0};
uint8_t lastKnownLedcReads[5] = {0, 0, 0, 0, 0};
// OLED vars
bool oledEnabled = false;
bool oledInitDone = false;
bool oledUseProgressBars = false;
bool oledFlipScreen = false;
bool oledFixBuggedScreen = false;
byte oledMaxPage = 3;
byte oledCurrentPage = 3; // Start with the network page to help identifying the IP
byte oledSecondsPerPage = 10;
unsigned long oledLogoDrawn = 0;
unsigned long oledLastTimeUpdated = 0;
unsigned long oledLastTimePageChange = 0;
unsigned long oledLastTimeFixBuggedScreen = 0;
// SHT30 vars
bool shtEnabled = false;
bool shtInitDone = false;
bool shtReadDataSuccess = false;
byte shtI2cAddress = 0x44;
unsigned long shtLastTimeUpdated = 0;
bool shtDataRequested = false;
float shtCurrentTemp = 0;
float shtLastKnownTemp = 0;
float shtCurrentHumidity = 0;
float shtLastKnownHumidity = 0;
// Pin/IO vars
const int8_t anPentaLEDPins[5] = {14, 13, 12, 4, 2};
int8_t oledSpiClk = 15;
int8_t oledSpiData = 16;
int8_t oledSpiCs = 27;
int8_t oledSpiDc = 32;
int8_t oledSpiRst = 33;
int8_t shtSda = 1;
int8_t shtScl = 3;
bool isAnPentaLedPin(int8_t pin)
{
for(int8_t i = 0; i <= 4; i++)
{
if(anPentaLEDPins[i] == pin)
return true;
}
return false;
}
void getCurrentUsedLedPins()
{
for (int8_t lp = 0; lp <= 4; lp++) currentLedPins[lp] = 0;
byte numBusses = busses.getNumBusses();
byte numUsedPins = 0;
for (int8_t b = 0; b < numBusses; b++) {
Bus* curBus = busses.getBus(b);
if (curBus != nullptr) {
uint8_t pins[5] = {0, 0, 0, 0, 0};
currentBussesNumPins[b] = curBus->getPins(pins);
for (int8_t p = 0; p < currentBussesNumPins[b]; p++) {
if (isAnPentaLedPin(pins[p])) {
currentLedPins[numUsedPins] = pins[p];
numUsedPins++;
}
}
}
}
}
void getCurrentLedcValues()
{
byte numBusses = busses.getNumBusses();
byte numLedc = 0;
for (int8_t b = 0; b < numBusses; b++) {
Bus* curBus = busses.getBus(b);
if (curBus != nullptr) {
uint32_t curPixColor = curBus->getPixelColor(0);
uint8_t _data[5] = {255, 255, 255, 255, 255};
_data[3] = curPixColor >> 24;
_data[0] = curPixColor >> 16;
_data[1] = curPixColor >> 8;
_data[2] = curPixColor;
for (uint8_t i = 0; i < currentBussesNumPins[b]; i++) {
currentLedcReads[numLedc] = (_data[i] * bri) / 255;
numLedc++;
}
}
}
}
void initOledDisplay()
{
PinManagerPinType pins[5] = { { oledSpiClk, true }, { oledSpiData, true }, { oledSpiCs, true }, { oledSpiDc, true }, { oledSpiRst, true } };
if (!pinManager.allocateMultiplePins(pins, 5, PinOwner::UM_QuinLEDAnPenta)) {
DEBUG_PRINTF("[%s] OLED pin allocation failed!\n", _name);
oledEnabled = oledInitDone = false;
return;
}
oledDisplay = (U8G2 *) new U8G2_SSD1306_128X64_NONAME_2_4W_SW_SPI(U8G2_R0, oledSpiClk, oledSpiData, oledSpiCs, oledSpiDc, oledSpiRst);
if (oledDisplay == nullptr) {
DEBUG_PRINTF("[%s] OLED init failed!\n", _name);
oledEnabled = oledInitDone = false;
return;
}
oledDisplay->begin();
oledDisplay->setBusClock(40 * 1000 * 1000);
oledDisplay->setContrast(10);
oledDisplay->setPowerSave(0);
oledDisplay->setFont(u8g2_font_6x10_tf);
oledDisplay->setFlipMode(oledFlipScreen);
oledDisplay->firstPage();
do {
oledDisplay->drawXBMP(0, 16, 128, 36, quinLedLogo);
} while (oledDisplay->nextPage());
oledLogoDrawn = millis();
oledInitDone = true;
}
void cleanupOledDisplay()
{
if (oledInitDone) {
oledDisplay->clear();
}
pinManager.deallocatePin(oledSpiClk, PinOwner::UM_QuinLEDAnPenta);
pinManager.deallocatePin(oledSpiData, PinOwner::UM_QuinLEDAnPenta);
pinManager.deallocatePin(oledSpiCs, PinOwner::UM_QuinLEDAnPenta);
pinManager.deallocatePin(oledSpiDc, PinOwner::UM_QuinLEDAnPenta);
pinManager.deallocatePin(oledSpiRst, PinOwner::UM_QuinLEDAnPenta);
delete oledDisplay;
oledEnabled = false;
oledInitDone = false;
}
bool isOledReady()
{
return oledEnabled && oledInitDone;
}
void initSht30TempHumiditySensor()
{
PinManagerPinType pins[2] = { { shtSda, true }, { shtScl, true } };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::UM_QuinLEDAnPenta)) {
DEBUG_PRINTF("[%s] SHT30 pin allocation failed!\n", _name);
shtEnabled = shtInitDone = false;
return;
}
TwoWire *wire = new TwoWire(1);
wire->setClock(400000);
sht30TempHumidSensor = (SHT *) new SHT30();
sht30TempHumidSensor->begin(shtI2cAddress, wire);
// The SHT lib calls wire.begin() again without the SDA and SCL pins... So call it again here...
wire->begin(shtSda, shtScl);
if (sht30TempHumidSensor->readStatus() == 0xFFFF) {
DEBUG_PRINTF("[%s] SHT30 init failed!\n", _name);
shtEnabled = shtInitDone = false;
return;
}
shtInitDone = true;
}
void cleanupSht30TempHumiditySensor()
{
if (shtInitDone) {
sht30TempHumidSensor->reset();
}
pinManager.deallocatePin(shtSda, PinOwner::UM_QuinLEDAnPenta);
pinManager.deallocatePin(shtScl, PinOwner::UM_QuinLEDAnPenta);
delete sht30TempHumidSensor;
shtEnabled = false;
shtInitDone = false;
}
void cleanup()
{
if (isOledReady()) {
cleanupOledDisplay();
}
if (isShtReady()) {
cleanupSht30TempHumiditySensor();
}
enabled = false;
}
bool oledCheckForNetworkChanges()
{
if (lastKnownNetworkConnected != Network.isConnected() || lastKnownIp != Network.localIP()
|| lastKnownWiFiConnected != WiFi.isConnected() || lastKnownSsid != WiFi.SSID()
|| lastKnownApActive != apActive || lastKnownApSsid != apSSID || lastKnownApPass != apPass || lastKnownApChannel != apChannel) {
lastKnownNetworkConnected = Network.isConnected();
lastKnownIp = Network.localIP();
lastKnownWiFiConnected = WiFi.isConnected();
lastKnownSsid = WiFi.SSID();
lastKnownApActive = apActive;
lastKnownApSsid = apSSID;
lastKnownApPass = apPass;
lastKnownApChannel = apChannel;
return networkHasChanged = true;
}
#ifdef WLED_USE_ETHERNET
if (lastKnownEthType != ethernetType || lastKnownEthLinkUp != ETH.linkUp()) {
lastKnownEthType = ethernetType;
lastKnownEthLinkUp = ETH.linkUp();
return networkHasChanged = true;
}
#endif
return networkHasChanged = false;
}
byte oledGetNextPage()
{
return oledCurrentPage + 1 <= oledMaxPage ? oledCurrentPage + 1 : 1;
}
void oledShowPage(byte page, bool updateLastTimePageChange = false)
{
oledCurrentPage = page;
updateOledDisplay();
oledLastTimeUpdated = millis();
if (updateLastTimePageChange) oledLastTimePageChange = oledLastTimeUpdated;
}
/*
* Page 1: Overall brightness and LED outputs
* Page 2: General info like temp, humidity and others
* Page 3: Network info
*/
void updateOledDisplay()
{
if (!isOledReady()) return;
oledDisplay->firstPage();
do {
oledDisplay->setFont(u8g2_font_chroma48medium8_8r);
oledDisplay->drawStr(0, 8, serverDescription);
oledDisplay->drawHLine(0, 13, 127);
oledDisplay->setFont(u8g2_font_6x10_tf);
byte charPerRow = 21;
byte oledRow = 23;
switch (oledCurrentPage) {
// LED Outputs
case 1:
{
char charCurrentBrightness[charPerRow+1] = "Brightness:";
if (oledUseProgressBars) {
oledDisplay->drawStr(0, oledRow, charCurrentBrightness);
// There is no method to draw a filled box with rounded corners. So draw the rounded frame first, then fill that frame accordingly to LED percentage
oledDisplay->drawRFrame(68, oledRow - 6, 60, 7, 2);
oledDisplay->drawBox(69, oledRow - 5, int(round(58*getPercentageForBrightness(bri)) / 100), 5);
}
else {
sprintf(charCurrentBrightness, "%s %d%%", charCurrentBrightness, getPercentageForBrightness(bri));
oledDisplay->drawStr(0, oledRow, charCurrentBrightness);
}
oledRow += 8;
byte drawnLines = 0;
for (int8_t app = 0; app <= 4; app++) {
for (int8_t clp = 0; clp <= 4; clp++) {
if (anPentaLEDPins[app] == currentLedPins[clp]) {
char charCurrentLedcReads[17];
sprintf(charCurrentLedcReads, "LED %d:", app+1);
if (oledUseProgressBars) {
oledDisplay->drawStr(0, oledRow+(drawnLines*8), charCurrentLedcReads);
oledDisplay->drawRFrame(38, oledRow - 6 + (drawnLines * 8), 90, 7, 2);
oledDisplay->drawBox(39, oledRow - 5 + (drawnLines * 8), int(round(88*getPercentageForBrightness(currentLedcReads[clp])) / 100), 5);
}
else {
sprintf(charCurrentLedcReads, "%s %d%%", charCurrentLedcReads, getPercentageForBrightness(currentLedcReads[clp]));
oledDisplay->drawStr(0, oledRow+(drawnLines*8), charCurrentLedcReads);
}
drawnLines++;
}
}
}
break;
}
// Various info
case 2:
{
if (isShtReady() && shtReadDataSuccess) {
char charShtCurrentTemp[charPerRow+4]; // Reserve 3 more bytes than usual as we gonna have one UTF8 char which can be up to 4 bytes.
sprintf(charShtCurrentTemp, "Temperature: %.02f°C", shtCurrentTemp);
char charShtCurrentHumidity[charPerRow+1];
sprintf(charShtCurrentHumidity, "Humidity: %.02f RH", shtCurrentHumidity);
oledDisplay->drawUTF8(0, oledRow, charShtCurrentTemp);
oledDisplay->drawStr(0, oledRow + 10, charShtCurrentHumidity);
oledRow += 20;
}
if (mqttEnabled && mqttServer[0] != 0) {
char charMqttStatus[charPerRow+1];
sprintf(charMqttStatus, "MQTT: %s", (WLED_MQTT_CONNECTED ? "Connected" : "Disconnected"));
oledDisplay->drawStr(0, oledRow, charMqttStatus);
oledRow += 10;
}
// Always draw these two on the bottom
char charUptime[charPerRow+1];
sprintf(charUptime, "Uptime: %ds", int(millis()/1000 + rolloverMillis*4294967)); // From json.cpp
oledDisplay->drawStr(0, 53, charUptime);
char charWledVersion[charPerRow+1];
sprintf(charWledVersion, "WLED v%s", versionString);
oledDisplay->drawStr(0, 63, charWledVersion);
break;
}
// Network Info
case 3:
#ifdef WLED_USE_ETHERNET
if (lastKnownEthType == WLED_ETH_NONE) {
oledDisplay->drawStr(0, oledRow, "Ethernet: No board selected");
oledRow += 10;
}
else if (!lastKnownEthLinkUp) {
oledDisplay->drawStr(0, oledRow, "Ethernet: Link Down");
oledRow += 10;
}
#endif
if (lastKnownNetworkConnected) {
#ifdef WLED_USE_ETHERNET
if (lastKnownEthLinkUp) {
oledDisplay->drawStr(0, oledRow, "Ethernet: Link Up");
oledRow += 10;
}
else
#endif
// Wi-Fi can be active with ETH being connected, but we don't mind...
if (lastKnownWiFiConnected) {
#ifdef WLED_USE_ETHERNET
if (!lastKnownEthLinkUp) {
#endif
oledDisplay->drawStr(0, oledRow, "Wi-Fi: Connected");
char currentSsidChar[lastKnownSsid.length() + 1];
lastKnownSsid.toCharArray(currentSsidChar, lastKnownSsid.length() + 1);
char charCurrentSsid[50];
sprintf(charCurrentSsid, "SSID: %s", currentSsidChar);
oledDisplay->drawStr(0, oledRow + 10, charCurrentSsid);
oledRow += 20;
#ifdef WLED_USE_ETHERNET
}
#endif
}
String currentIpStr = lastKnownIp.toString();
char currentIpChar[currentIpStr.length() + 1];
currentIpStr.toCharArray(currentIpChar, currentIpStr.length() + 1);
char charCurrentIp[30];
sprintf(charCurrentIp, "IP: %s", currentIpChar);
oledDisplay->drawStr(0, oledRow, charCurrentIp);
}
// If WLED AP is active. Theoretically, it can even be active with ETH being connected, but we don't mind...
else if (lastKnownApActive) {
char charCurrentApStatus[charPerRow+1];
sprintf(charCurrentApStatus, "WLED AP: %s (Ch: %d)", (lastKnownApActive ? "On" : "Off"), lastKnownApChannel);
oledDisplay->drawStr(0, oledRow, charCurrentApStatus);
char charCurrentApSsid[charPerRow+1];
sprintf(charCurrentApSsid, "SSID: %s", lastKnownApSsid);
oledDisplay->drawStr(0, oledRow + 10, charCurrentApSsid);
char charCurrentApPass[charPerRow+1];
sprintf(charCurrentApPass, "PW: %s", lastKnownApPass);
oledDisplay->drawStr(0, oledRow + 20, charCurrentApPass);
// IP is hardcoded / no var exists in WLED at the time this mod was coded, so also hardcode it here
oledDisplay->drawStr(0, oledRow + 30, "IP: 4.3.2.1");
}
break;
}
} while (oledDisplay->nextPage());
}
bool isShtReady()
{
return shtEnabled && shtInitDone;
}
public:
// strings to reduce flash memory usage (used more than twice)
static const char _name[];
static const char _enabled[];
static const char _oledEnabled[];
static const char _oledUseProgressBars[];
static const char _oledFlipScreen[];
static const char _oledSecondsPerPage[];
static const char _oledFixBuggedScreen[];
static const char _shtEnabled[];
static const unsigned char quinLedLogo[];
static int8_t getPercentageForBrightness(byte brightness)
{
return int(((float)brightness / (float)255) * 100);
}
/*
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
void setup()
{
if (enabled) {
lastKnownBri = bri;
if (oledEnabled) {
initOledDisplay();
}
if (shtEnabled) {
initSht30TempHumiditySensor();
}
getCurrentUsedLedPins();
initDone = true;
}
firstRunDone = true;
}
/*
* loop() is called continuously. Here you can check for events, read sensors, etc.
*
* Tips:
* 1. You can use "if (WLED_CONNECTED)" to check for a successful network connection.
* Additionally, "if (WLED_MQTT_CONNECTED)" is available to check for a connection to an MQTT broker.
*
* 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
* Instead, use a timer check as shown here.
*/
void loop()
{
if (!enabled || !initDone || strip.isUpdating()) return;
if (isShtReady()) {
if (millis() - shtLastTimeUpdated > 30000 && !shtDataRequested) {
sht30TempHumidSensor->requestData();
shtDataRequested = true;
shtLastTimeUpdated = millis();
}
if (shtDataRequested) {
if (sht30TempHumidSensor->dataReady()) {
if (sht30TempHumidSensor->readData()) {
shtCurrentTemp = sht30TempHumidSensor->getTemperature();
shtCurrentHumidity = sht30TempHumidSensor->getHumidity();
shtReadDataSuccess = true;
}
else {
shtReadDataSuccess = false;
}
shtDataRequested = false;
}
}
}
if (isOledReady() && millis() - oledLogoDrawn > 3000) {
// Check for changes on the current page and update the OLED if a change is detected
if (millis() - oledLastTimeUpdated > 150) {
// If there was a network change, force page 3 (network page)
if (oledCheckForNetworkChanges()) {
oledCurrentPage = 3;
}
// Only redraw a page if there was a change for that page
switch (oledCurrentPage) {
case 1:
lastKnownBri = bri;
// Probably causes lag to always do ledcRead(), so rather re-do the math, 'cause we can't easily get it...
getCurrentLedcValues();
if (bri != lastKnownBri || lastKnownLedcReads[0] != currentLedcReads[0] || lastKnownLedcReads[1] != currentLedcReads[1] || lastKnownLedcReads[2] != currentLedcReads[2]
|| lastKnownLedcReads[3] != currentLedcReads[3] || lastKnownLedcReads[4] != currentLedcReads[4]) {
lastKnownLedcReads[0] = currentLedcReads[0]; lastKnownLedcReads[1] = currentLedcReads[1]; lastKnownLedcReads[2] = currentLedcReads[2]; lastKnownLedcReads[3] = currentLedcReads[3]; lastKnownLedcReads[4] = currentLedcReads[4];
oledShowPage(1);
}
break;
case 2:
if (shtLastKnownTemp != shtCurrentTemp || shtLastKnownHumidity != shtCurrentHumidity) {
shtLastKnownTemp = shtCurrentTemp;
shtLastKnownHumidity = shtCurrentHumidity;
oledShowPage(2);
}
break;
case 3:
if (networkHasChanged) {
networkHasChanged = false;
oledShowPage(3, true);
}
break;
}
}
// Cycle through OLED pages
if (millis() - oledLastTimePageChange > oledSecondsPerPage * 1000) {
// Periodically fixing a "bugged out" OLED. More details in the ReadMe
if (oledFixBuggedScreen && millis() - oledLastTimeFixBuggedScreen > 60000) {
oledDisplay->begin();
oledLastTimeFixBuggedScreen = millis();
}
oledShowPage(oledGetNextPage(), true);
}
}
}
void addToConfig(JsonObject &root)
{
JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
top[FPSTR(_enabled)] = enabled;
top[FPSTR(_oledEnabled)] = oledEnabled;
top[FPSTR(_oledUseProgressBars)] = oledUseProgressBars;
top[FPSTR(_oledFlipScreen)] = oledFlipScreen;
top[FPSTR(_oledSecondsPerPage)] = oledSecondsPerPage;
top[FPSTR(_oledFixBuggedScreen)] = oledFixBuggedScreen;
top[FPSTR(_shtEnabled)] = shtEnabled;
// Update LED pins on config save
getCurrentUsedLedPins();
}
/**
* readFromConfig() is called before setup() to populate properties from values stored in cfg.json
*
* The function should return true if configuration was successfully loaded or false if there was no configuration.
*/
bool readFromConfig(JsonObject &root)
{
JsonObject top = root[FPSTR(_name)];
if (top.isNull()) {
DEBUG_PRINTF("[%s] No config found. (Using defaults.)\n", _name);
return false;
}
bool oldEnabled = enabled;
bool oldOledEnabled = oledEnabled;
bool oldOledFlipScreen = oledFlipScreen;
bool oldShtEnabled = shtEnabled;
getJsonValue(top[FPSTR(_enabled)], enabled);
getJsonValue(top[FPSTR(_oledEnabled)], oledEnabled);
getJsonValue(top[FPSTR(_oledUseProgressBars)], oledUseProgressBars);
getJsonValue(top[FPSTR(_oledFlipScreen)], oledFlipScreen);
getJsonValue(top[FPSTR(_oledSecondsPerPage)], oledSecondsPerPage);
getJsonValue(top[FPSTR(_oledFixBuggedScreen)], oledFixBuggedScreen);
getJsonValue(top[FPSTR(_shtEnabled)], shtEnabled);
// First run: reading from cfg.json, nothing to do here, will be all done in setup()
if (!firstRunDone) {
DEBUG_PRINTF("[%s] First run, nothing to do\n", _name);
}
// Check if mod has been en-/disabled
else if (enabled != oldEnabled) {
enabled ? setup() : cleanup();
DEBUG_PRINTF("[%s] Usermod has been en-/disabled\n", _name);
}
// Config has been changed, so adopt to changes
else if (enabled) {
if (oldOledEnabled != oledEnabled) {
oledEnabled ? initOledDisplay() : cleanupOledDisplay();
}
else if (oledEnabled && oldOledFlipScreen != oledFlipScreen) {
oledDisplay->clear();
oledDisplay->setFlipMode(oledFlipScreen);
oledShowPage(oledCurrentPage);
}
if (oldShtEnabled != shtEnabled) {
shtEnabled ? initSht30TempHumiditySensor() : cleanupSht30TempHumiditySensor();
}
DEBUG_PRINTF("[%s] Config (re)loaded\n", _name);
}
return true;
}
void addToJsonInfo(JsonObject& root)
{
if (!enabled && !isShtReady()) {
return;
}
JsonObject user = root["u"];
if (user.isNull()) user = root.createNestedObject("u");
JsonArray jsonTemp = user.createNestedArray("Temperature");
JsonArray jsonHumidity = user.createNestedArray("Humidity");
if (shtLastTimeUpdated == 0 || !shtReadDataSuccess) {
jsonTemp.add(0);
jsonHumidity.add(0);
if (shtLastTimeUpdated == 0) {
jsonTemp.add(" Not read yet");
jsonHumidity.add(" Not read yet");
}
else {
jsonTemp.add(" Error");
jsonHumidity.add(" Error");
}
return;
}
jsonHumidity.add(shtCurrentHumidity);
jsonHumidity.add(" RH");
jsonTemp.add(shtCurrentTemp);
jsonTemp.add(" °C");
}
/*
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.
*/
uint16_t getId()
{
return USERMOD_ID_QUINLED_AN_PENTA;
}
};
// strings to reduce flash memory usage (used more than twice)
// Config settings
const char QuinLEDAnPentaUsermod::_name[] PROGMEM = "QuinLED-An-Penta";
const char QuinLEDAnPentaUsermod::_enabled[] PROGMEM = "Enabled";
const char QuinLEDAnPentaUsermod::_oledEnabled[] PROGMEM = "Enable-OLED";
const char QuinLEDAnPentaUsermod::_oledUseProgressBars[] PROGMEM = "OLED-Use-Progress-Bars";
const char QuinLEDAnPentaUsermod::_oledFlipScreen[] PROGMEM = "OLED-Flip-Screen-180";
const char QuinLEDAnPentaUsermod::_oledSecondsPerPage[] PROGMEM = "OLED-Seconds-Per-Page";
const char QuinLEDAnPentaUsermod::_oledFixBuggedScreen[] PROGMEM = "OLED-Fix-Bugged-Screen";
const char QuinLEDAnPentaUsermod::_shtEnabled[] PROGMEM = "Enable-SHT30-Temp-Humidity-Sensor";
// Other strings
const unsigned char QuinLEDAnPentaUsermod::quinLedLogo[] PROGMEM = {
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F, 0xFD, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0x03, 0xE0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x00, 0x80, 0xFF,
0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x3F, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x1F, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0xF0, 0x07, 0xFE, 0xFF, 0xFF, 0x0F, 0xFC,
0xFF, 0xFF, 0xF3, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0xFC, 0x0F, 0xFE,
0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0xE3, 0xFF, 0xA5, 0xFF, 0xFF, 0xFF,
0x0F, 0xFC, 0x1F, 0xFE, 0xFF, 0xFF, 0x1F, 0xFC, 0xFF, 0xFF, 0xE1, 0xFF,
0x00, 0xF0, 0xE3, 0xFF, 0x0F, 0xFE, 0x1F, 0xFE, 0xFF, 0xFF, 0x3F, 0xFF,
0xFF, 0xFF, 0xE3, 0xFF, 0x00, 0xF0, 0x00, 0xFF, 0x07, 0xFE, 0x1F, 0xFC,
0xF9, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xE1, 0xFF, 0x00, 0xF0, 0x00, 0xFE,
0x07, 0xFF, 0x1F, 0xFC, 0xF0, 0xC7, 0x3F, 0xFF, 0xFF, 0xFF, 0xE3, 0xFF,
0xF1, 0xFF, 0x00, 0xFC, 0x07, 0xFF, 0x1F, 0xFE, 0xF0, 0xC3, 0x1F, 0xFE,
0x00, 0xFF, 0xE1, 0xFF, 0xF1, 0xFF, 0x30, 0xF8, 0x07, 0xFF, 0x1F, 0xFE,
0xF0, 0xC3, 0x1F, 0xFE, 0x00, 0xFC, 0xC3, 0xFF, 0xE1, 0xFF, 0xF0, 0xF0,
0x03, 0xFF, 0x0F, 0x7E, 0xF0, 0xC3, 0x1F, 0x7E, 0x00, 0xF8, 0xE3, 0xFF,
0xE1, 0xFF, 0xF1, 0xF1, 0x83, 0xFF, 0x0F, 0x7E, 0xF0, 0xC3, 0x1F, 0x7E,
0x00, 0xF0, 0xC3, 0xFF, 0xE1, 0xFF, 0xF1, 0xE1, 0x83, 0xFF, 0x0F, 0xFE,
0xF0, 0xC3, 0x1F, 0xFE, 0xF8, 0xF0, 0xC3, 0xFF, 0xA1, 0xFF, 0xF1, 0xE3,
0x81, 0xFF, 0x0F, 0x7E, 0xF0, 0xC1, 0x1F, 0x7E, 0xF0, 0xF0, 0xC3, 0xFF,
0x01, 0xF8, 0xE1, 0xC3, 0x83, 0xFF, 0x0F, 0x7F, 0xF8, 0xC3, 0x1F, 0x7E,
0xF8, 0xF0, 0xC3, 0xFF, 0x03, 0xF8, 0xE1, 0xC7, 0x81, 0xE4, 0x0F, 0x7F,
0xF0, 0xC3, 0x1F, 0xFE, 0xF8, 0xF0, 0xC3, 0xFF, 0x01, 0xF8, 0xE3, 0xC7,
0x01, 0xC0, 0x07, 0x7F, 0xF8, 0xC1, 0x1F, 0x7E, 0xF0, 0xE1, 0xC3, 0xFF,
0xC3, 0xFD, 0xE1, 0x87, 0x01, 0x00, 0x07, 0x7F, 0xF8, 0xC3, 0x1F, 0x7E,
0xF8, 0xF0, 0xC3, 0xFF, 0xE3, 0xFF, 0xE3, 0x87, 0x01, 0x00, 0x82, 0x3F,
0xF8, 0xE1, 0x1F, 0xFE, 0xF8, 0xE1, 0xC3, 0xFF, 0xC3, 0xFF, 0xC3, 0x87,
0x01, 0x00, 0x80, 0x3F, 0xF8, 0xC1, 0x1F, 0x7E, 0xF0, 0xF1, 0xC3, 0xFF,
0xC3, 0xFF, 0xC3, 0x87, 0x03, 0x0F, 0x80, 0x3F, 0xF8, 0xE1, 0x0F, 0x7E,
0xF8, 0xE1, 0x87, 0xFF, 0xC3, 0xFF, 0xC7, 0x87, 0x03, 0x04, 0xC0, 0x7F,
0xF0, 0xE1, 0x0F, 0xFF, 0xF8, 0xF1, 0x87, 0xFF, 0xC3, 0xFF, 0xC3, 0x87,
0x07, 0x00, 0xE0, 0x7F, 0x00, 0xE0, 0x1F, 0x7E, 0xF0, 0xE0, 0xC3, 0xFF,
0xC7, 0xFF, 0x87, 0x87, 0x0F, 0x00, 0xE0, 0x7F, 0x00, 0xE0, 0x0F, 0x7F,
0xF8, 0xE1, 0x07, 0x80, 0x07, 0xEA, 0x87, 0xC1, 0x0F, 0x00, 0x80, 0xFF,
0x00, 0xE0, 0x1F, 0x7E, 0xF0, 0xE1, 0x07, 0x00, 0x03, 0x80, 0x07, 0xC0,
0x7F, 0x00, 0x00, 0xFF, 0x01, 0xE0, 0x1F, 0xFF, 0xF8, 0xE1, 0x07, 0x00,
0x07, 0x00, 0x07, 0xE0, 0xFF, 0xF7, 0x01, 0xFF, 0x57, 0xF7, 0x9F, 0xFF,
0xFC, 0xF1, 0x0F, 0x00, 0x07, 0x80, 0x0F, 0xE0, 0xFF, 0xFF, 0x03, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF7, 0xBF, 0xFE,
0xFF, 0xFF, 0x8F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
};