Enhanced ST7789 display usermod.

.gitignore

@@ -15,3 +15,4 @@
 node_modules
 .idea
 .direnv
+wled-update.sh

usermods/ST7789_display/README.md

@@ -2,11 +2,14 @@
 
 This usermod allow to use 240x240 display to display following:
 
+* current date and time;
 * Network SSID;
 * IP address;
+* WiFi signal strength;
 * Brightness;
 * Chosen effect;
 * Chosen palette;
+* effect speed and intensity;
 * Estimated current in mA;
 
 ## Hardware
@@ -46,27 +49,29 @@ Add lines to section:
 default_envs = esp32dev
 build_flags = ${common.build_flags_esp32}
   -D USERMOD_ST7789_DISPLAY
-
+    -DUSER_SETUP_LOADED=1
+    -DST7789_DRIVER=1
+    -DTFT_WIDTH=240
+    -DTFT_HEIGHT=240
+    -DCGRAM_OFFSET=1
+    -DTFT_MOSI=21
+    -DTFT_SCLK=22
+    -DTFT_DC=27
+    -DTFT_RST=26
+    -DTFT_BL=14
+    -DLOAD_GLCD=1
+    ;optional for WROVER
+    ;-DCONFIG_SPIRAM_SUPPORT=1
 ```
 
 Save the `platformio.ini` file.  Once this is saved, the required library files should be automatically downloaded for modifications in a later step.
 
 ### TFT_eSPI Library Adjustments
 
-We need to modify a file in the `TFT_eSPI` library. If you followed the directions to modify and save the `platformio.ini` file above, the `User_Setup_Select.h` file can be found in the `/.pio/libdeps/esp32dev/TFT_eSPI` folder.
+If you are not using PlatformIO you need to modify a file in the `TFT_eSPI` library. If you followed the directions to modify and save the `platformio.ini` file above, the `Setup24_ST7789.h` file can be found in the `/.pio/libdeps/esp32dev/TFT_eSPI/User_Setups/` folder.
 
-Modify the  `User_Setup_Select.h` file as follows:
+Edit `Setup_ST7789.h` file and uncomment nad changep GPIO pin numbers in lines containing `TFT_MOSI`, `TFT_SCLK`, `TFT_RST`, `TFT_DC`.
 
-* Comment out the following line (which is the 'default' setup file):
+Modify the `User_Setup_Select.h` by uncommentig the line containing `#include <User_Setups/Setup24_ST7789.h>` and commenting out line containing `#include <User_Setup.h>`.
 
-```ini
+If your display includes backlight enable pin, #define TFT_BL with backlight enable GPIO number.
-//#include <User_Setup.h>           // Default setup is root library folder
-```
-
-* Add following line:
-
-```ini
-#include <User_Setups/Setup_ST7789_Display.h>    // Setup file for ESP32 ST7789V SPI bus TFT
-```
-
-* Copy file `"Setup_ST7789_Display.h"` from usermod folder to `/.pio/libdeps/esp32dev/TFT_eSPI/User_Setups`

usermods/ST7789_display/ST7789_display.h

@@ -7,27 +7,48 @@
 #include <TFT_eSPI.h>
 #include <SPI.h>
 
-#define USERMOD_ST7789_DISPLAY 97
+#ifndef USER_SETUP_LOADED
-
+    #ifndef ST7789_DRIVER
-#ifndef TFT_DISPOFF
+        #error Please define ST7789_DRIVER
-#define TFT_DISPOFF 0x28
+    #endif
+    #ifndef TFT_WIDTH
+        #error Please define TFT_WIDTH
+    #endif
+    #ifndef TFT_HEIGHT
+        #error Please define TFT_HEIGHT
+    #endif
+    #ifndef TFT_MOSI
+        #error Please define TFT_MOSI
+    #endif
+    #ifndef TFT_SCLK
+        #error Please define TFT_SCLK
+    #endif
+    #ifndef TFT_DC
+        #error Please define TFT_DC
+    #endif
+    #ifndef TFT_RST
+        #error Please define TFT_RST
+    #endif
+    #ifndef LOAD_GLCD
+        #error Please define LOAD_GLCD
+    #endif
+#endif
+#ifndef TFT_BL
+    #define TFT_BL -1
 #endif
 
-#ifndef TFT_SLPIN
+#define USERMOD_ID_ST7789_DISPLAY 97
-#define TFT_SLPIN   0x10
-#endif
 
-#define TFT_MOSI            21
+TFT_eSPI tft = TFT_eSPI(TFT_WIDTH, TFT_HEIGHT); // Invoke custom library
-#define TFT_SCLK            22
-#define TFT_DC              18
-#define TFT_RST             5
-#define TFT_BL              26  // Display backlight control pin
 
-TFT_eSPI tft = TFT_eSPI(240, 240); // Invoke custom library
+// Extra char (+1) for null
+#define LINE_BUFFER_SIZE          20
 
 // How often we are redrawing screen
 #define USER_LOOP_REFRESH_RATE_MS 1000
 
+extern int getSignalQuality(int rssi);
+
 
 //class name. Use something descriptive and leave the ": public Usermod" part :)
 class St7789DisplayUsermod : public Usermod {
@@ -45,9 +66,70 @@ class St7789DisplayUsermod : public Usermod {
     uint8_t knownBrightness = 0;
     uint8_t knownMode = 0;
     uint8_t knownPalette = 0;
-    uint8_t tftcharwidth = 19;  // Number of chars that fit on screen with text size set to 2
+    uint8_t knownEffectSpeed = 0;
+    uint8_t knownEffectIntensity = 0;
+    uint8_t knownMinute = 99;
+    uint8_t knownHour = 99;
+
+    const uint8_t tftcharwidth = 19;  // Number of chars that fit on screen with text size set to 2
     long lastUpdate = 0;
 
+    void center(String &line, uint8_t width) {
+      int len = line.length();
+      if (len<width) for (byte i=(width-len)/2; i>0; i--) line = ' ' + line;
+      for (byte i=line.length(); i<width; i++) line += ' ';
+    }
+
+    /**
+     * Display the current date and time in large characters
+     * on the middle rows. Based 24 or 12 hour depending on
+     * the useAMPM configuration.
+     */
+    void showTime() {
+        if (!ntpEnabled) return;
+        char lineBuffer[LINE_BUFFER_SIZE];
+
+        updateLocalTime();
+        byte minuteCurrent = minute(localTime);
+        byte hourCurrent   = hour(localTime);
+        byte secondCurrent = second(localTime);
+        knownMinute = minuteCurrent;
+        knownHour = hourCurrent;
+
+        byte currentMonth = month(localTime);
+        sprintf_P(lineBuffer, PSTR("%s %2d "), monthShortStr(currentMonth), day(localTime));
+        tft.setTextColor(TFT_SILVER);
+        tft.setCursor(84, 0);
+        tft.setTextSize(2);
+        tft.print(lineBuffer);
+
+        byte showHour = hourCurrent;
+        boolean isAM = false;
+        if (useAMPM) {
+            if (showHour == 0) {
+                showHour = 12;
+                isAM = true;
+            } else if (showHour > 12) {
+                showHour -= 12;
+                isAM = false;
+            } else {
+                isAM = true;
+            }
+        }
+
+        sprintf_P(lineBuffer, PSTR("%2d:%02d"), (useAMPM ? showHour : hourCurrent), minuteCurrent);
+        tft.setTextColor(TFT_WHITE);
+        tft.setTextSize(4);
+        tft.setCursor(60, 24);
+        tft.print(lineBuffer);
+
+        tft.setTextSize(2);
+        tft.setCursor(186, 24);
+        //sprintf_P(lineBuffer, PSTR("%02d"), secondCurrent);
+        if (useAMPM) tft.print(isAM ? "AM" : "PM");
+        //else         tft.print(lineBuffer);
+    }
+
   public:
     //Functions called by WLED
 
@@ -57,6 +139,9 @@ class St7789DisplayUsermod : public Usermod {
      */
     void setup()
     {
+        PinManagerPinType pins[] = { { TFT_MOSI, true }, { TFT_MISO, false}, { TFT_SCLK, true }, { TFT_CS, true}, { TFT_DC, true}, { TFT_RST, true }, { TFT_BL, true } };
+        if (!pinManager.allocateMultiplePins(pins, 5, PinOwner::UM_FourLineDisplay)) { return; }
+
         tft.init();
         tft.setRotation(0);  //Rotation here is set up for the text to be readable with the port on the left. Use 1 to flip.
         tft.fillScreen(TFT_BLACK);
@@ -65,10 +150,10 @@ class St7789DisplayUsermod : public Usermod {
         tft.setTextDatum(MC_DATUM);
         tft.setTextSize(2);
         tft.print("Loading...");
-        if (TFT_BL > 0) 
+        if (TFT_BL >= 0) 
-        { // TFT_BL has been set in the TFT_eSPI library
+        {
-         pinMode(TFT_BL, OUTPUT); // Set backlight pin to output mode
+            pinMode(TFT_BL, OUTPUT); // Set backlight pin to output mode
-         digitalWrite(TFT_BL, HIGH); // Turn backlight on.
+            digitalWrite(TFT_BL, HIGH); // Turn backlight on.
         }
     }
 
@@ -91,174 +176,189 @@ class St7789DisplayUsermod : public Usermod {
      *    Instead, use a timer check as shown here.
      */
     void loop() {
-// Check if we time interval for redrawing passes.
+        char buff[LINE_BUFFER_SIZE];
-    if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS)
+
+        // Check if we time interval for redrawing passes.
+        if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS)
         {
             return;
         }
-    lastUpdate = millis();
+        lastUpdate = millis();
   
-// Turn off display after 5 minutes with no change.
+        // Turn off display after 5 minutes with no change.
-    if(!displayTurnedOff && millis() - lastRedraw > 5*60*1000)
+        if (!displayTurnedOff && millis() - lastRedraw > 5*60*1000)
         {
-            digitalWrite(TFT_BL, LOW); // Turn backlight off. 
+            if (TFT_BL >= 0) digitalWrite(TFT_BL, LOW); // Turn backlight off. 
             displayTurnedOff = true;
         } 
 
-// Check if values which are shown on display changed from the last time.
+        // Check if values which are shown on display changed from the last time.
-    if (((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid)
+        if ((((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid) ||
-    {
+            (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : Network.localIP())) ||
-    needRedraw = true;
+            (knownBrightness != bri) ||
-    }
+            (knownEffectSpeed != effectSpeed) ||
-    else if (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP()))
+            (knownEffectIntensity != effectIntensity) ||
-    {
+            (knownMode != strip.getMode()) ||
-    needRedraw = true;
+            (knownPalette != strip.getSegment(0).palette))
-    }
-    else if (knownBrightness != bri)
-    {
-    needRedraw = true;
-    }
-    else if (knownMode != strip.getMode())
-    {
-    needRedraw = true;
-    }
-    else if (knownPalette != strip.getSegment(0).palette)
-    {
-    needRedraw = true;
-    }
-
-    if (!needRedraw)
-    {
-    return;
-    }
-    needRedraw = false;
-  
-    if (displayTurnedOff)
-    {
-        digitalWrite(TFT_BL, TFT_BACKLIGHT_ON); // Turn backlight on.
-        displayTurnedOff = false;
-    }
-    lastRedraw = millis();
-
-// Update last known values.
-    #if defined(ESP8266)
-        knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
-    #else
-        knownSsid = WiFi.SSID();
-    #endif
-    knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
-    knownBrightness = bri;
-    knownMode = strip.getMode();
-    knownPalette = strip.getSegment(0).palette;
-
-    tft.fillScreen(TFT_BLACK);
-    tft.setTextSize(2);
-// First row with Wifi name
-    tft.setTextColor(TFT_SILVER);
-    tft.setCursor(3, 40);
-    tft.print(knownSsid.substring(0, tftcharwidth > 1 ? tftcharwidth - 1 : 0));
-// Print `~` char to indicate that SSID is longer, than our dicplay
-    if (knownSsid.length() > tftcharwidth)
-        tft.print("~");
-
-// Second row with AP IP and Password or IP
-    tft.setTextColor(TFT_GREEN);
-    tft.setTextSize(2);
-    tft.setCursor(3, 64);
-// Print AP IP and password in AP mode or knownIP if AP not active.
-
-    if (apActive)
-    {
-    tft.setTextColor(TFT_YELLOW);
-    tft.print("AP IP: ");
-    tft.print(knownIp);
-    tft.setCursor(3,86);
-    tft.setTextColor(TFT_YELLOW);
-    tft.print("AP Pass:");
-    tft.print(apPass);
-    }
-    else
-    {
-    tft.setTextColor(TFT_GREEN);
-    tft.print("IP: ");
-    tft.print(knownIp);
-    tft.setCursor(3,86);
-    //tft.print("Signal Strength: ");
-    //tft.print(i.wifi.signal);
-    tft.setTextColor(TFT_WHITE);
-    tft.print("Bri: ");
-    tft.print(((float(bri)/255)*100),0);
-    tft.print("%");
-    }
-
-// Third row with mode name
-    tft.setCursor(3, 108);
-    uint8_t qComma = 0;
-    bool insideQuotes = false;
-    uint8_t printedChars = 0;
-    char singleJsonSymbol;
-// Find the mode name in JSON
-    for (size_t i = 0; i < strlen_P(JSON_mode_names); i++)
-    {
-        singleJsonSymbol = pgm_read_byte_near(JSON_mode_names + i);
-        switch (singleJsonSymbol)
         {
+            needRedraw = true;
+        }
+
+        if (!needRedraw)
+        {
+            return;
+        }
+        needRedraw = false;
+    
+        if (displayTurnedOff)
+        {
+            digitalWrite(TFT_BL, HIGH); // Turn backlight on.
+            displayTurnedOff = false;
+        }
+        lastRedraw = millis();
+
+        // Update last known values.
+        #if defined(ESP8266)
+            knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
+        #else
+            knownSsid = WiFi.SSID();
+        #endif
+        knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
+        knownBrightness = bri;
+        knownMode = strip.getMode();
+        knownPalette = strip.getSegment(0).palette;
+        knownEffectSpeed = effectSpeed;
+        knownEffectIntensity = effectIntensity;
+
+        tft.fillScreen(TFT_BLACK);
+
+        showTime();
+
+        tft.setTextSize(2);
+
+        // Wifi name
+        tft.setTextColor(TFT_GREEN);
+        tft.setCursor(0, 60);
+        String line = knownSsid.substring(0, tftcharwidth-1);
+        // Print `~` char to indicate that SSID is longer, than our display
+        if (knownSsid.length() > tftcharwidth) line = line.substring(0, tftcharwidth-1) + '~';
+        center(line, tftcharwidth);
+        tft.print(line.c_str());
+
+        // Print AP IP and password in AP mode or knownIP if AP not active.
+        if (apActive)
+        {
+            tft.setCursor(0, 84);
+            tft.print("AP IP: ");
+            tft.print(knownIp);
+            tft.setCursor(0,108);
+            tft.print("AP Pass:");
+            tft.print(apPass);
+        }
+        else
+        {
+            tft.setCursor(0, 84);
+            line = knownIp.toString();
+            center(line, tftcharwidth);
+            tft.print(line.c_str());
+            // percent brightness
+            tft.setCursor(0, 120);
+            tft.setTextColor(TFT_WHITE);
+            tft.print("Bri: ");
+            tft.print((((int)bri*100)/255));
+            tft.print("%");
+            // signal quality
+            tft.setCursor(124,120);
+            tft.print("Sig: ");
+            if (getSignalQuality(WiFi.RSSI()) < 10) {
+                tft.setTextColor(TFT_RED);
+            } else if (getSignalQuality(WiFi.RSSI()) < 25) {
+                tft.setTextColor(TFT_ORANGE);
+            } else {
+                tft.setTextColor(TFT_GREEN);
+            }
+            tft.print(getSignalQuality(WiFi.RSSI()));
+            tft.setTextColor(TFT_WHITE);
+            tft.print("%");
+        }
+
+        // mode name
+        tft.setTextColor(TFT_CYAN);
+        tft.setCursor(0, 144);
+        uint8_t qComma = 0;
+        bool insideQuotes = false;
+        uint8_t printedChars = 0;
+        char singleJsonSymbol;
+        // Find the mode name in JSON
+        for (size_t i = 0; i < strlen_P(JSON_mode_names); i++)
+        {
+            singleJsonSymbol = pgm_read_byte_near(JSON_mode_names + i);
+            switch (singleJsonSymbol)
+            {
+                case '"':
+                insideQuotes = !insideQuotes;
+            break;
+            case '[':
+            case ']':
+            break;
+            case ',':
+            qComma++;
+            default:
+                if (!insideQuotes || (qComma != knownMode))
+                break;
+            tft.print(singleJsonSymbol);
+            printedChars++;
+            }
+        if ((qComma > knownMode) || (printedChars > tftcharwidth - 1))
+        break;
+        }
+
+        // palette name
+        tft.setTextColor(TFT_YELLOW);
+        tft.setCursor(0, 168);
+        qComma = 0;
+        insideQuotes = false;
+        printedChars = 0;
+        // Looking for palette name in JSON.
+        for (size_t i = 0; i < strlen_P(JSON_palette_names); i++)
+        {
+        singleJsonSymbol = pgm_read_byte_near(JSON_palette_names + i);
+            switch (singleJsonSymbol)
+            {
             case '"':
             insideQuotes = !insideQuotes;
-        break;
-        case '[':
-        case ']':
-        break;
-        case ',':
-        qComma++;
-        default:
-            if (!insideQuotes || (qComma != knownMode))
             break;
-        tft.setTextColor(TFT_MAGENTA);
+            case '[':
-        tft.print(singleJsonSymbol);
+            case ']':
-        printedChars++;
-        }
-    if ((qComma > knownMode) || (printedChars > tftcharwidth - 1))
-      break;
-    }
-// Fourth row with palette name
-    tft.setTextColor(TFT_YELLOW);
-    tft.setCursor(3, 130);
-    qComma = 0;
-    insideQuotes = false;
-    printedChars = 0;
-// Looking for palette name in JSON.
-    for (size_t i = 0; i < strlen_P(JSON_palette_names); i++)
-    {
-    singleJsonSymbol = pgm_read_byte_near(JSON_palette_names + i);
-        switch (singleJsonSymbol)
-        {
-        case '"':
-        insideQuotes = !insideQuotes;
-        break;
-        case '[':
-        case ']':
-        break;
-        case ',':
-        qComma++;
-        default:
-            if (!insideQuotes || (qComma != knownPalette))
             break;
-        tft.print(singleJsonSymbol);
+            case ',':
-        printedChars++;
+            qComma++;
+            default:
+                if (!insideQuotes || (qComma != knownPalette))
+                break;
+            tft.print(singleJsonSymbol);
+            printedChars++;
+            }
+        // The following is modified from the code from the u8g2/u8g8 based code (knownPalette was knownMode)
+        if ((qComma > knownPalette) || (printedChars > tftcharwidth - 1))
+        break;
         }
-// The following is modified from the code from the u8g2/u8g8 based code (knownPalette was knownMode)
+
-    if ((qComma > knownPalette) || (printedChars > tftcharwidth - 1))
+        tft.setCursor(0, 192);
-      break;
+        tft.setTextColor(TFT_SILVER);
-    }
+        sprintf_P(buff, PSTR("FX  Spd:%3d Int:%3d"), effectSpeed, effectIntensity);
-// Fifth row with estimated mA usage
+        tft.print(buff);
-    tft.setTextColor(TFT_SILVER);
+
-    tft.setCursor(3, 152);
+        // Fifth row with estimated mA usage
-// Print estimated milliamp usage (must specify the LED type in LED prefs for this to be a reasonable estimate).
+        tft.setTextColor(TFT_SILVER);
-    tft.print("Current: ");
+        tft.setCursor(0, 216);
-    tft.print(strip.currentMilliamps);
+        // Print estimated milliamp usage (must specify the LED type in LED prefs for this to be a reasonable estimate).
-    tft.print("mA");
+        tft.print("Current: ");
+        tft.setTextColor(TFT_ORANGE);
+        tft.print(strip.currentMilliamps);
+        tft.print("mA");
     }
+
     /*
      * addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
      * Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
@@ -295,7 +395,7 @@ class St7789DisplayUsermod : public Usermod {
      */
     void readFromJsonState(JsonObject& root)
     {
-      userVar0 = root["user0"] | userVar0; //if "user0" key exists in JSON, update, else keep old value
+      //userVar0 = root["user0"] | userVar0; //if "user0" key exists in JSON, update, else keep old value
       //if (root["bri"] == 255) Serial.println(F("Don't burn down your garage!"));
     }
 
@@ -316,8 +416,8 @@ class St7789DisplayUsermod : public Usermod {
      */
     void addToConfig(JsonObject& root)
     {
-      JsonObject top = root.createNestedObject("exampleUsermod");
+      //JsonObject top = root.createNestedObject("exampleUsermod");
-      top["great"] = userVar0; //save this var persistently whenever settings are saved
+      //top["great"] = userVar0; //save this var persistently whenever settings are saved
     }
 
 
@@ -329,10 +429,11 @@ class St7789DisplayUsermod : public Usermod {
      * but also that if you want to write persistent values to a dynamic buffer, you'd need to allocate it here instead of in setup.
      * If you don't know what that is, don't fret. It most likely doesn't affect your use case :)
      */
-    void readFromConfig(JsonObject& root)
+    bool readFromConfig(JsonObject& root)
     {
-      JsonObject top = root["top"];
+      //JsonObject top = root["top"];
-      userVar0 = top["great"] | 42; //The value right of the pipe "|" is the default value in case your setting was not present in cfg.json (e.g. first boot)
+      //userVar0 = top["great"] | 42; //The value right of the pipe "|" is the default value in case your setting was not present in cfg.json (e.g. first boot)
+      return true;
     }
 
 
@@ -342,7 +443,7 @@ class St7789DisplayUsermod : public Usermod {
      */
     uint16_t getId()
     {
-      return USERMOD_ST7789_DISPLAY;
+      return USERMOD_ID_ST7789_DISPLAY;
     }
 
    //More methods can be added in the future, this example will then be extended.

usermods/ST7789_display/Setup_ST7789_Display.h

@@ -1,39 +0,0 @@
-// Setup for the ESP32 board with 1.5" 240x240 display
-
-// See SetupX_Template.h for all options available
-
-#define ST7789_DRIVER
-#define TFT_SDA_READ   // Display has a bidirectionsl SDA pin
-
-#define TFT_WIDTH  240
-#define TFT_HEIGHT 240
-
-#define CGRAM_OFFSET      // Library will add offsets required
-
-//#define TFT_MISO -1
-
-#define TFT_MOSI            21
-#define TFT_SCLK            22
-//#define TFT_CS              5
-#define TFT_DC              18
-#define TFT_RST             5
-
-#define TFT_BL          26  // Display backlight control pin
-
-#define TFT_BACKLIGHT_ON HIGH  // HIGH or LOW are options
-
-#define LOAD_GLCD
-#define LOAD_FONT2
-#define LOAD_FONT4
-#define LOAD_FONT6
-#define LOAD_FONT7
-#define LOAD_FONT8
-#define LOAD_GFXFF
-
-//#define SMOOTH_FONT
-
-//#define SPI_FREQUENCY  27000000
-  #define SPI_FREQUENCY  40000000   // Maximum for ILI9341
-
-
-#define SPI_READ_FREQUENCY  6000000 // 6 MHz is the maximum SPI read speed for the ST7789V

wled00/usermods_list.cpp

@@ -86,6 +86,10 @@
 #include "../usermods/rgb-rotary-encoder/rgb-rotary-encoder.h"
 #endif
 
+#ifdef USERMOD_ST7789_DISPLAY
+#include "../usermods/ST7789_display/ST7789_Display.h"
+#endif
+
 void registerUsermods()
 {
 /*
@@ -167,4 +171,8 @@ void registerUsermods()
   #ifdef RGB_ROTARY_ENCODER
   usermods.add(new RgbRotaryEncoderUsermod());
   #endif
+
+  #ifdef USERMOD_ST7789_DISPLAY
+  usermods.add(new St7789DisplayUsermod());
+  #endif
 }

wled00/wled.h

@@ -8,7 +8,7 @@
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2108271
+#define VERSION 2108281
 
 //uncomment this if you have a "my_config.h" file you'd like to use
 //#define WLED_USE_MY_CONFIG