* BH1750 upgrades
Moved the definitions into the main usermods_list.cpp instead of having a section to copy across.
Added Home Assistant Discovery topic for light sensor. This is toggleable from the usermod menu.
* Configure pin, other enhancements, readme
Implemented pin manager
Made pins configurable at runtime
Improved info screen outputs
Added F() around strings
Updated readme
* Resolve conflict
* Merge branch 'main'
* Missing comma
Co-authored-by: Christian Schwinne <dev.aircoookie@gmail.com>
Co-authored-by: Christian Schwinne <cschwinne@gmail.com>
* Starting on Ping Pong Clock Usermod, still having to check the led indices and test the stuff out of it
* Adding some attributes to be configured, Added platformio_override
* Fixed LED Numbering, Changed Color to RGB to Work with Settings
* Removing LED Positions from Config
* Some documenting
* Removed example comments to make ping pong clock mod more readable
Co-authored-by: Schmailzl, Sebastian <sebastian.schmailzl@wk-it.com>
Co-authored-by: Christian Schwinne <dev.aircoookie@gmail.com>
Co-authored-by: Christian Schwinne <cschwinne@gmail.com>
* implement analog clock as a usermod
* fix some bugs, use toki for time measurement, implement fading seconds
* added timezone handling to analog clock
* fixed looping second pointer, lower refresh rate
* removed mqtt debug code
* implement seconds effect choice
* adapt to 0_14 branch
Co-authored-by: Christian Schwinne <dev.aircoookie@gmail.com>
* added first version (work in progress)
* added some sensors to publish
* typo
* added dependency
* mqtt si7021_* names + don't retain
* timer to 60 s
* some changes to HA auto discovery
* added config entries (no function yet)
* renaming
* made configs work
* added getId()
* refactoring + wrong mqtt topics fixed
* retain HA auto discovery
* do not spam serial console on each sensor update
* added readme
* add update interval info
Co-authored-by: Christian Schwinne <dev.aircoookie@gmail.com>
* - implement V2 Usermod to handle wordclocks with 11x10 pixels and 4 additional dots for the minutes
* - fix wording issue for "six"
-
* - add some more comments
* - fix issue with "zwölf"
* UM QuinLED-An-Penta: First version
* UM QuinLED-An-Penta: Made OLED seconds a setting; small improvements
* UM QuinLED-An-Penta: Fixed unique ID
* Merge branch 'master' of https://github.com/Aircoookie/WLED
* UM QuinLED-An-Penta: Fixed config loading
* UM QuinLED-An-Penta: Replaced ledcRead() with calculating the percentage
* UM QuinLED-An-Penta: Fixed temp sensor readings
* UM QuinLED-An-Penta: Removing OLED bus clk setting
* UM QuinLED-An-Penta: ETH support, lots of OLED improvements
* Testing new wrapper functions to read Usermod config
* Usermod Settings polishing
- remove getBoolFromJsonKey() (no longer needed), fix getValueFromJsonKey(element, destination, defaultvalue)
- Update Usermod Settings html "number" field to use step="any", and make wider to make maximum values fully visible
- step="any" allows viewing/submitting full 7/8-digit float values, and the arrow buttons step by 1 now, instead of .00001 (which wasn't good for integers or floats)
- html wasn't generated/compressed yet
* Update usermod_v2_example.h with more complete example and documentation for Usermod Settings
- readFromConfig() has three options for how to load values from the config JSON, we need to pick one
* Update/rename usermode_rotary_brightness_color, to be used as an example of more robust parsing Usermod Settings values
* Update Usermod example, rename getValueFromJsonKey() to getJsonValue()
- chose single readFromConfig() pattern
- demonstrating 3-argument getJsonValue()
- remove leftover printf in getJsonValue()
Co-authored-by: Louis Beaudoin <louis@embedded-creations.com>
- Utilizing addToConfig() & readFromConfig()
- UM configuration Settings page
- MQTT support for usermods
- A few sample usermods including rewritten Temparature and new Multi-Relay
* Initial version of the PIR Staircase wipe up/down.
* Add pulldown reminder
* Workaround for missing D6 and D7 definitions on esp32dev
* Add pinouts for d1 mini (esp8266 and esp32) and NodeMCU (and Arduino)
* These IO pins on all these boards... NodeMCU and d1_mini esp32 supported. The others? Fingers crossed.
* Changed to not collide with led strip pins
* PIR on GPIO 15 and 16 on esp32 d1 mini
* Removed PIN number ifdefs, it is impossible to match all boards
* Settings in flash, info and API
* Update README.md
* Small doc changes
* Improved README
* Fixed error in reading configuration
* Add API documentation
* Documentation and code cleanup
* Add enable/disable to API settings
* Restore segment state when disabling plugin
* Add debounce
* Set segments in animation mode
* Set segments in animation mode
* Add support for HR04 sensors
* Add preliminary description for using an HR04 sensor
* Fixed typenumber and linked to datasheet
* Moved config away from defines to prevent user error
* Trigger Sensors through API
* Rename scripts folder so that it's name doesn't clash with the `pio` command (prevents platformIO in VSCode to work properly on Mac)
* Bugfix for detection problems
* Separated config from code
* Renamed Signal to Trigger pin
* Filename adjusted
* Clarifications and additions to README
* Fixed references to pio scripts
* Fixed API trigger bug
* Adjustments to README.md
* More efficient use of flash cycles, better naming
* Bugfix: bottom sensor was not read properly
* Renamed to Animated_Staircase
* Add note on ultrasonic sensor and esp32
* Better naming of defines
* Bugfix: Swipe down started with two steps.
* Removed upload port in nodemcuv2 section
Co-authored-by: Rolf <rolf@phobos.local>
Co-authored-by: Rolf <>
* Very incomplete work toward sorting.
* Sort modes and palettes upon startup so I don't have to maintain the static index array.
* Remove cpp test file I used for development
* Added ModeSortUsermod, modified the other two usermods to use it.
* Update platformio_override.ini.sample and readme for ModeSortUsermod
* restore methods accidentally removed.
* Ability to lookup Usermod by id so Usermods can use other Usermods.
* Rotary Encoder UI using two Usermods
* Updates. More to come, probably.
* Updated rotary usermod to honor USE_FOUR_LINE_DISPLAY if you want to use four line display. It should be truly optional, now.
* minor logic improvement to showing the current time in clock mode.
* improved 24 hour display foratting and ability to use the FourLineDisplayUsermod without the RotaryEncoderUIUsermod (option disable sleep and clock modes).
* Improved ordering of defines in the FourLineDisplayUsermod to put options people might need to change together toward the top.
* relocate plugins. add mention of the Wire requirement.
* usermod filenames changed, updating comment in const.h
* fix usermod locations.
* fix usermods_list to include changed folder.
* Improved for both usermods: install, config, and docs. Included sample platform_override.ini.
* Updated name of SDA and SCL defines for config of display
* update docs.
* Wrong year. Fixed.
* Fix youtube link, improve config of sleep/clock when the rotary usermod isn't installed.
* Minor fixes to four line display. Addition of Auto Save v2 usermod.
* Allow config for auto-save to set the preset number to use. Load preset at startup (so brightness is set correctly).
* Updated docs for Auto Save.
* Updated docs for Auto Save.
Co-authored-by: Kevin Dorff <kevin@macbookpro-kevin-wifi.local>
* Adding SensorsToMqtt usermod, which allows WLED to read bmp280/SI7021/CCS811 sensors and publish it via MQTT to e.g. Home Assistant.
* undo some changes we dont want upstream
* undo some changes we dont want upstream2
Co-authored-by: Machiel Pronk <machiel.pronk89@gmail.com>
