Commit Graph

1315 Commits

Author SHA1 Message Date
Blaz Kristan
c11acb6308 Minor UI tweaks. 2021-02-26 22:43:57 +01:00
Blaz Kristan
d76103eb76 Minor UI tweak. 2021-02-26 18:46:16 +01:00
Blaz Kristan
779f984a30 Minor UI fix. 2021-02-26 16:46:46 +01:00
Blaz Kristan
9c55017191 Stray } fix. 2021-02-26 16:21:49 +01:00
Blaz Kristan
c6f575d8d3 Preprocessor fix. 2021-02-26 16:05:05 +01:00
Blaž Kristan
2c0c22dbf3 RGBW override cleanup, UI fix. 2021-02-26 08:34:38 +01:00
Blaz Kristan
73a99a7dea Merge branch 'dev' of https://github.com/aircoookie/WLED into dev 2021-02-25 23:02:37 +01:00
Blaz Kristan
3c81337630 PWM pins saving (hack bug) fix. UI changes. 2021-02-25 22:55:49 +01:00
Blaž Kristan
3f41ba6bdf Pin clash fix, minimization. 2021-02-25 13:22:29 +01:00
Blaž Kristan
2812f61957 Debug pin fix. 2021-02-25 09:56:09 +01:00
Blaž Kristan
f23cee17eb Minor fixes and optimisations.
Temperature usermod update for pin saving.
2021-02-25 09:54:10 +01:00
Rolf
746a8badac
Animated Staircase Usermod (#1763)
* Initial version of the PIR Staircase wipe up/down.

* Add pulldown reminder

* Workaround for missing D6 and D7 definitions on esp32dev

* Add pinouts for d1 mini (esp8266 and esp32) and NodeMCU (and Arduino)

* These IO pins on all these boards... NodeMCU and d1_mini esp32 supported. The others? Fingers crossed.

* Changed to not collide with led strip pins

* PIR on GPIO 15 and 16 on esp32 d1 mini

* Removed PIN number ifdefs, it is impossible to match all boards

* Settings in flash, info and API

* Update README.md

* Small doc changes

* Improved README

* Fixed error in reading configuration

* Add API documentation

* Documentation and code cleanup

* Add enable/disable to API settings

* Restore segment state when disabling plugin

* Add debounce

* Set segments in animation mode

* Set segments in animation mode

* Add support for HR04 sensors

* Add preliminary description for  using an HR04 sensor

* Fixed typenumber and linked to datasheet

* Moved config away from defines to prevent user error

* Trigger Sensors through API

* Rename scripts folder so that it's name doesn't clash with the `pio` command (prevents platformIO in VSCode to work properly on Mac)

* Bugfix for detection problems

* Separated config from code

* Renamed Signal to Trigger pin

* Filename adjusted

* Clarifications and additions to README

* Fixed references to pio scripts

* Fixed API trigger bug

* Adjustments to README.md

* More efficient use of flash cycles, better naming

* Bugfix: bottom sensor was not read properly

* Renamed to Animated_Staircase

* Add note on ultrasonic sensor and esp32

* Better naming of defines

* Bugfix: Swipe down started with two steps.

* Removed upload port in nodemcuv2 section

Co-authored-by: Rolf <rolf@phobos.local>
Co-authored-by: Rolf <>
2021-02-25 09:52:48 +01:00
Blaz Kristan
f24fcfca69 Merge branch 'dev' of https://github.com/aircoookie/WLED into dev
Conflicts:
	wled00/set.cpp
	wled00/xml.cpp
2021-02-24 22:11:27 +01:00
Blaz Kristan
d60506a75d Skip 1st fix, save LED count, removed reverse. 2021-02-24 21:33:44 +01:00
Blaz Kristan
77dee439e6 1st attempt at 'blazoncek' 0.12 2021-02-24 20:23:32 +01:00
cschwinne
d7790a04c5 5 configurable pins per bus (for analog) 2021-02-24 14:49:39 +01:00
cschwinne
2c0b07387b Added QuinLED-ESP32-Ethernet type
Set 19531 as default ESP32 PWM frequency
2021-02-23 00:47:48 +01:00
Aircoookie
06f2f9adbb
Merge pull request #1771 from Aircoookie/mergedev_210222
Update dev
2021-02-22 22:31:22 +01:00
Aircoookie
37d5b9109f
Merge branch 'dev' into mergedev_210222 2021-02-22 22:31:12 +01:00
Aircoookie
76e269ee21
Merge pull request #1764 from k7bbr/master
Add support for WESP32 board, change default Ethernet type to none, add macro to specify default Ethernet type at compile time
2021-02-21 22:38:15 +01:00
Aircoookie
3103939197
Merge pull request #1766 from edwinm/patch-1
Use ldscript_1m128k in platformio_override.ini.sample
2021-02-21 17:23:50 +01:00
Edwin Martin
3f01c87223
Use ldscript_1m128k in platformio_override.ini.sample
The current value ldscript_1m0m doesn't exist anymore and WLED won't compile. Using ldscript_1m128k makes it compile.
2021-02-20 23:21:55 +01:00
k7bbr
e4cda4bb99 change default Ethernet board to none 2021-02-20 02:18:37 -07:00
k7bbr
f333f867c5 Updated platformio.ini to reference esp32_eth env
change default ethernet type to none
add macro option to change default eth board at compile time
2021-02-20 01:54:54 -07:00
Kevin Dorff
75c46f7a0e
Create the sorted index of modes and palettes at startup (#1741)
* Very incomplete work toward sorting.

* Sort modes and palettes upon startup so I don't have to maintain the static index array.

* Remove cpp test file I used for development

* Added ModeSortUsermod, modified the other two usermods to use it.

* Update platformio_override.ini.sample and readme for ModeSortUsermod

* restore methods accidentally removed.
2021-02-18 00:28:01 +01:00
Aircoookie
5c6cb41124
Merge pull request #1742 from WJCFerguson/geometric_IR_brightness_steps
IR: change to non-linear brightness steps
2021-02-17 23:59:38 +01:00
Aircoookie
94f7c03871
Merge pull request #1760 from embedded-creations/fixWrapperEsp32Spi
bus_wrapper fixes/improvements for ESP32 SPI
2021-02-17 23:38:19 +01:00
Louis Beaudoin
96d5c03a6d bus_wrapper improvements for SPI output
- Identifying ESP32 hardware SPI by pin number is broken and flawed, replace with temporary hack instead until a better method of assigned resources can be devised
  - NeoPixelBus doesn't support HSPI, only VSPI right now, so matching HSPI pins to enable a non-existent VSPI driver is broken
  - ESP32 SPI peripherals can use alternate pins, so choosing to use hardware SPI only on the default pins is flawed
- Specify pins during Begin() call to allow for alternate pins and avoid driving the chip select signal
- Dotstar Software/Hardware output tested on ESP32, other SPI protocols and ESP8266 support was not tested
2021-02-17 17:03:57 +00:00
Louis Beaudoin
3a03bc41a7 Fix bus_wrapper.h bugs:
- missing breaks in switch(busType identifying SPI LEDs)
- set correct pin order for begin()
2021-02-17 16:58:03 +00:00
Aircoookie
331844ff73
Merge pull request #1708 from Matchlighter/patch-1
Add DNRGBW Mode for Real Time UDP Control
2021-02-16 17:43:33 +01:00
James Ferguson
2bc38e3784 IR: change to non-linear brightness steps
Prior Incrementing/decrementing by fixed steps (typically 10) means large
perceptual jumps at low brightness and small jumps at high brightness.  This
change moves to a geometric progression, closer at the bottom of the range and
widely spaced at the top.

While it could be done as a relative jump (incrementing by bri/4 and
decrementing bri/5 works quite well), it makes for irregular behavior when
moving back and forth.
2021-02-13 18:29:56 -05:00
cschwinne
d580dedfc8 Remove stray endif 2021-02-13 01:48:05 +01:00
cschwinne
aa0f4c9985 Update dev branch (resolve conflicts) 2021-02-13 01:43:16 +01:00
b3nj1
aa242d897d
DHT22/DHT11 humidity/temperature sensor usermod (#1719)
* DHT22/DHT11 humidity/temperature sensor usermod

* cleanup - don't report when usermod is auto-disabled since report isn't persistent

* track error count; retry once after error occurs

* for esp32, use esp32DHT library

* fix unreliable ESP32 readings by switching DHT library to https://github.com/alwynallan/DHT_nonblocking

* change default pin to Q2; don't burst readings if error occurs

Co-authored-by: Aircoookie <dev.aircoookie@gmail.com>
2021-02-13 01:21:13 +01:00
Aircoookie
d56ab6c971
Merge pull request #1738 from blazoncek/dynamic-led-map
Dynamic LED map creation from JSON file
2021-02-13 01:07:52 +01:00
cschwinne
2f7be3475d Updated mapping comment 2021-02-13 01:02:14 +01:00
Blaz Kristan
2544d2e068 Dynamic LED map creation from JSON file /ledmap.json in format {"map":[4,3,2,1,...]}.
Used for rearranging LEDs (matrices, awkward placement, ...)
2021-02-12 11:54:35 +01:00
k7bbr
a09f64aee5 Add Ethernet support for WESP32 board 2021-02-11 02:36:15 -07:00
Aircoookie
f7114fc2aa
Merge pull request #1729 from blazoncek/tetris-fx
Tetris (falling bricks) effect & Colortwinkles low brightness fix.
2021-02-10 00:42:35 +01:00
cschwinne
7092f337ef Faster Tetrix mode
- Replaced a letter in name (copyright)
- 2x speed
- Replaced Merry christmas mode
2021-02-10 00:37:05 +01:00
Kevin Dorff
8e71c3ae17
Rotary Encoder, Four Line Display, and Auto Save Usermods (#1722)
* Ability to lookup Usermod by id so Usermods can use other Usermods.

* Rotary Encoder UI using two Usermods

* Updates. More to come, probably.

* Updated rotary usermod to honor USE_FOUR_LINE_DISPLAY if you want to use four line display. It should be truly optional, now.

* minor logic improvement to showing the current time in clock mode.

* improved 24 hour display foratting and ability to use the FourLineDisplayUsermod without the RotaryEncoderUIUsermod (option disable sleep and clock modes).

* Improved ordering of defines in the FourLineDisplayUsermod to put options people might need to change together toward the top.

* relocate plugins. add mention of the Wire requirement.

* usermod filenames changed, updating comment in const.h

* fix usermod locations.

* fix usermods_list to include changed folder.

* Improved for both usermods: install, config, and docs. Included sample platform_override.ini.

* Updated name of SDA and SCL defines for config of display

* update docs.

* Wrong year. Fixed.

* Fix youtube link, improve config of sleep/clock when the rotary usermod isn't installed.

* Minor fixes to four line display. Addition of Auto Save v2 usermod.

* Allow config for auto-save to set the preset number to use. Load preset at startup (so brightness is set correctly).

* Updated docs for Auto Save.

* Updated docs for Auto Save.

Co-authored-by: Kevin Dorff <kevin@macbookpro-kevin-wifi.local>
2021-02-09 17:15:43 +01:00
Blaz Kristan
a9c211d66c Tetris (falling bricks) effect & Colortwinkles low brightness fix. 2021-02-07 14:45:34 +01:00
cschwinne
0902b628f8 Added FPS indication in info 2021-02-05 01:33:26 +01:00
Aircoookie
517a85f9e9
Merge pull request #1711 from Aircoookie/dev-multipin-select
Multipin select working!
2021-01-31 00:42:39 +01:00
Aircoookie
94941a7732
Merge pull request #1704 from Moustachauve/content-cache
Add Cache-Control to index
2021-01-31 00:42:24 +01:00
cschwinne
f3aa8d368e Multipin appears to work 2021-01-31 00:38:27 +01:00
cschwinne
9518c5f2e4 might work 2021-01-30 20:51:36 +01:00
cschwinne
e44173ff09 JSON ledDoc (does not work, crash on delete) 2021-01-30 13:23:38 +01:00
Matchlighter
fa1106d3cf
Add DNRGBW Mode for Real Time UDP Control
Add DNRGBW mode so that >367 RGBW LEDs may be controlled, similar to the DNRGB mode.
2021-01-29 23:11:37 -07:00
Christophe Gagnier
c24d574f90 Add Cache-Control to index 2021-01-28 22:16:36 -05:00