WLED/usermods/Enclosure_with_OLED_temp_ESP07/readme.md
srg74 8caeddde15
Spelling check by @wthomson (#2940)
A lot of spelling corrections. Now repo will sound like educated person :)

Co-authored-by: Bill Thomson <bt@kattt.org>
2022-12-10 16:12:55 +01:00

69 lines
1.8 KiB
Markdown

# Almost universal controller board for outdoor applications
This usermod is using ideas from @mrVanboy and @400killer
Installation of file: Copy and replace file in wled00 directory.
For BME280 sensor use usermod_bme280.cpp. Copy to wled00 and rename to usermod.cpp
## Project repository
- [Original repository](https://github.com/srg74/Controller-for-WLED-firmware) - Main controller repository
## Features
- SSD1306 128x32 and 128x64 I2C OLED display
- On screen IP address, SSID and controller status (e.g. ON or OFF, recent effect)
- Auto display shutoff for extending display lifetime
- Dallas temperature sensor
- Reporting temperature to MQTT broker
## Hardware
![Hardware connection](assets/controller.jpg)
## Functionality checked with
- ESP-07S
- PlatformIO
- SSD1306 128x32 I2C OLED display
- DS18B20 (temperature sensor)
- BME280 (temperature, humidity and pressure sensor)
- KY-022 (infrared receiver)
- Push button (N.O. momentary switch)
For Dallas sensor uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
```ini
# platformio.ini
...
[platformio]
...
default_envs = esp07
; default_envs = d1_mini
...
[common]
...
lib_deps_external =
...
#To use the SSD1306 OLED display, uncomment following
U8g2@~2.27.3
#For Dallas sensor, uncomment the following 2 lines
DallasTemperature@~3.8.0
OneWire@~2.3.5
...
```
For BME280 sensor, uncomment `U8g2@~2.27.3`,`BME280@~3.0.0 under` `[common]` section in `platformio.ini`:
```ini
# platformio.ini
...
[platformio]
...
default_envs = esp07
; default_envs = d1_mini
...
[common]
...
lib_deps_external =
...
#To use the SSD1306 OLED display, uncomment following
U8g2@~2.27.3
#For BME280 sensor uncomment following
BME280@~3.0.0
...
```