85 lines
3.8 KiB
Markdown
85 lines
3.8 KiB
Markdown
WLED is a basic, fast and (relatively) (ok, VERY relatively) secure implementation of a ESP8266 webserver to control Neopixel (WS2812B) leds
|
|
|
|
Uses ESP8266 Arduino libraries from 15th August 2016! Untested with newer version!
|
|
Contents in the /data directory need to be uploaded to SPIFFS.
|
|
|
|
Features: (V0.2)
|
|
- RGB and brightness sliders
|
|
- Settings page - configuration over network
|
|
- Access Point and station mode - automatic failsafe AP
|
|
- Edit page. Change html and other files via OTA.
|
|
|
|
Additions for V0.3 (nearly complete!)
|
|
- WS2812FX library integrated for nearly 50 special effects!
|
|
- Nightlight function (gradually dims down)
|
|
- Notifier function (multiple ESPs sync color via UDP broadcast)
|
|
- Support for power pushbutton
|
|
- Full OTA software update capability
|
|
- Password protected OTA page for added security (OTA lock)
|
|
|
|
Compile settings:
|
|
Board: WeMos D1 mini
|
|
CPU frequency: 80 MHz
|
|
Flash size : 4MB (1MB settings)
|
|
Upload speed: 115200
|
|
|
|
|
|
Quick start guide:
|
|
|
|
1. Make sure your ESP module has a min. 4MB SPI flash module. (currently working on supporting 1MB modules)
|
|
Connect a WS2812B RGB led strip to GPIO2. Optionally connect a NO-pushbutton to GPIO0 (internal pull-up) and ground.
|
|
|
|
2. Follow a guide to setup your Arduino client (I am using version 1.8.1) with the ESP8266 libraries.
|
|
For current compiles I use an old version from 15th August 2016.
|
|
|
|
3. You will also need the ESP8266 SPIFFS sketch data uploader. (currently working on making this step unnecessary)
|
|
-> In the newest commit this step is not essential (HTML included in sketch), but recommended, since otherwise you have to upload the pictures manually to /edit SPIFFS
|
|
-> The software will always use the HTML files in SPIFFS. If they are not existing, it will fallback to the sketch embedded HTML files.
|
|
|
|
4. In file "wled00.ino", change the LED count to the amount you connected. Proceed to flash the sketch and the SPIFFS data.
|
|
You should also change the access point and OTA update passphrases for added security (you can change them later, this is just the "factory default").
|
|
|
|
5. Connect to automatically started WiFi access point "WLED-AP" using default passwort "wled1234". Go to the IP "192.168.4.1".
|
|
|
|
6. Click on the wrench icon to edit settings like connecting the module to your home WiFi.
|
|
|
|
7. Have fun with the software!
|
|
|
|
|
|
Advanced module control via HTTP requests:
|
|
|
|
Base URL scheme: "<moduleip>/ajax_in". This will return a XML file with some current values.
|
|
Add one or multiple of the following parameters after the base url to change values:
|
|
"&A=<0-255>" set LED brightness (yellow slider)
|
|
"&R=<0-255>" set LED red value (red slider)
|
|
"&G=<0-255>" set LED green value (green slider)
|
|
"&B=<0-255>" set LED blue value (blue slider)
|
|
"&FX=<0-47>" set LED effect (refer to WS2812FX library)
|
|
"&SX=<0-255>" set LED effect speed (refer to WS2812FX library)
|
|
"&NR=<0 or 1>" receive notifications on or off
|
|
"&NS=<0 or 1>" send (direct) notifications on or off
|
|
"&NL=<0 or 1>" turns nightlight function on or off
|
|
("&OL=<0, 1, 3 or 5>" experimental clock overlays)
|
|
("&I=<0-255>" experimental individual LED control)
|
|
("&I=<0-255>&I2=<0-255>" experimental individual LED range control)
|
|
|
|
|
|
Software update procedure:
|
|
|
|
Method 1: Reflash the new update source via USB.
|
|
|
|
Method 2: The software has an integrated OTA software update capability.
|
|
First you have to enable it by typing in the correct OTA passphrase (default: "wledota") in the settings menu.
|
|
Remove the tick in the checkbox "OTA locked". Then save settings and reboot the ESP.
|
|
Now you can go to "<moduleip>/update" to update binary firmware.
|
|
To edit flash content (images and HTML), go to "<moduleip>/edit".
|
|
After you are done, it is recommended to lock the OTA function again.
|
|
To do so, tick the checkbox again (you can change the passphrase by typing in a new one now). Reboot.
|
|
If you try to access the update page now, you should see the message "OTA lock active".
|
|
|
|
|
|
|
|
|
|
|
|
|