099d2fd03d
* Update wizlights.h adds new features and options for wizlights usermod * Update wizlights.h Change how IPs are numbered. Non-programmers incorrectly start counting at 1 * Update wizlights.h updated default cold white enhanced white setting to a lower value. * Update wizlights.h added logic for connection check before UDP sending. Seems more important for ESP32 * Update readme.md
36 lines
1.7 KiB
Markdown
36 lines
1.7 KiB
Markdown
# Controlling Wiz lights
|
|
|
|
This usermod allows the control of [WiZ](https://www.wizconnected.com/en/consumer/) lights that are in the same network as the WLED controller.
|
|
|
|
The mod takes the colors from the first few pixels and sends them to the lights.
|
|
|
|
## Configuration
|
|
|
|
- Interval (ms)
|
|
- How frequently to update the WiZ lights, in milliseconds.
|
|
- Setting too low may causse ESP to become unresponsive.
|
|
- Send Delay (ms)
|
|
- An optional millisecond delay after updating each WiZ light.
|
|
- Can help smooth out effects when using a larger number of WiZ lights
|
|
- Use Enhanced White
|
|
- Enables using the WiZ lights onboard white LEDs instead of sending maximum RGB values.
|
|
- Tunable with warm and cool LEDs as supported by WiZ bulbs
|
|
- Note: Only sent when max RGB value is set, need to have automatic brightness limiter disabled
|
|
- ToDo: Have better logic for white value mixing to better take advantage of the lights capabilities
|
|
- Always Force Update
|
|
- Can be enabled to always send update message to light, even when color matches what was previously sent.
|
|
- Force update every x minutes
|
|
- Configuration option to allow adjusting the default force update timeout of 5 minutes.
|
|
- Setting to 0 has the same impact as enabling Always Force Update
|
|
-
|
|
Then enter the IPs for the lights to be controlled, in order. There is currently a limit of 15 devices that can be controled, but that number
|
|
can be easily changed by updating _MAX_WIZ_LIGHTS_.
|
|
|
|
|
|
|
|
|
|
## Related project
|
|
|
|
If you use these lights and python, make sure to check out the [pywizlight](https://github.com/sbidy/pywizlight) project. I learned how to
|
|
format the messages to control the lights from that project.
|