lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cd8d2c141e
WLED/CHANGELOG.md

718 lines
22 KiB
Markdown
Raw Blame History

## WLED changelog
### Builds after release 0.12.0
#### Build 2106180
- Fixed DOS on Chrome tab restore causing reboot
#### Build 2106170
- Optimized JSON buffer usage (pre-serialized color arrays)
#### Build 2106140
- Updated main logo
- Reduced flash usage by 0.8kB by using 8-bit instead of 32-bit PNGs for welcome and 404 pages
- Added a check to stop Alexa reporting an error if state set by macro differs from the expected state
#### Build 2106100
- Added support for multiple buttons with various types (PR #1977)
- Fixed infinite playlists (PR #2020)
- Added `r` to playlist object, allows for shuffle regardless of the `repeat` value
- Improved accuracy of NTP time sync
- Added possibility for WLED UDP sync to sync system time
- Improved UDP sync accuracy, if both sender and receiver are NTP synced
- Fixed a cache issue with restored tabs
- Cache CORS request
- Disable WiFi sleep by default on ESP32
#### Build 2105230
- No longer retain MQTT `/v` topic to alleviate storage loads on MQTT broker
- Fixed Sunrise calculation (atan_t approx. used outside of value range)
#### Build 2105200
- Fixed WS281x output on ESP32
- Fixed potential out-of-bounds write in MQTT
- Fixed IR pin not changeable if IR disabled
- Fixed XML API <wv> containing -1 on Manual only RGBW mode (see #888, #1783)
#### Build 2105171
- Always copy MQTT payloads to prevent non-0-terminated strings
- Updated ArduinoJson to 6.18.0
- Added experimental support for `{"on":"t"}` to toggle on/off state via JSON
#### Build 2105120
- Fixed possibility of non-0-terminated MQTT payloads
- Fixed two warnings regarding integer comparison
#### Build 2105112
- Usermod settings page no usermods message
- Lowered min speed for Drip effect
#### Build 2105111
- Fixed various Codacy code style and logic issues
#### Build 2105110
- Added Usermod settings page and configurable usermods (PR #1951)
- Added experimental `/json/cfg` endpoint for changing settings from JSON (see #1944, not part of official API)
#### Build 2105070
- Fixed not turning on after pressing "Off" on IR remote twice (#1950)
- Fixed OTA update file selection from Android app (TODO: file type verification in JS, since android can't deal with accept='.bin' attribute)
#### Build 2104220
- Version bump to 0.12.1-b1 "Hikari"
- Release and build script improvements (PR #1844)
#### Build 2104211
- Replace default TV simulator effect with the version that saves 18k of flash and appears visually identical
#### Build 2104210
- Added `tb` to JSON state, allowing setting the timebase (set tb=0 to start e.g. wipe effect from the beginning). Receive only.
- Slightly raised Solid mode refresh rate to work with LEDs (TM1814) that require refresh rates of at least 2fps
- Added sunrise and sunset calculation to the backup JSON time source
#### Build 2104151
- `NUM_STRIPS` no longer required with compile-time strip defaults
- Further optimizations in wled_math.h
#### Build 2104150
- Added ability to add multiple busses as compile time defaults using the esp32_multistrip usermod define syntax
#### Build 2104141
- Reduced memory usage by 540b by switching to a different trigonometric approximation
#### Build 2104140
- Added dynamic location-based Sunrise/Sunset macros (PR #1889)
- Improved seasonal background handling (PR #1890)
- Fixed instance discovery not working if MQTT not compiled in
- Fixed Button, IR, Relay pin not assigned by default (resolves #1891)
#### Build 2104120
- Added switch support (button macro is switch closing action, long press macro switch opening)
- Replaced Circus effect with new Running Dual effect (Circus is Tricolor Chase with Red/White/Black)
- Fixed ledmap with multiple segments (PR #1864)
#### Build 2104030
- Fixed ESP32 crash on Drip effect with reversed segment (#1854)
- Added flag `WLED_DISABLE_BROWNOUT_DET` to disable ESP32 brownout detector (off by default)
### WLED release 0.12.0
#### Build 2104020
- Allow clearing button/IR/relay pin on platforms that don't support negative numbers
- Removed AUX pin
- Hid some easter eggs, only to be found at easter
### Development versions between 0.11.1 and 0.12.0 releases
#### Build 2103310
- Version bump to 0.12.0 "Hikari"
- Fixed LED settings submission in iOS app
#### Build 2103300
- Version bump to 0.12.0-b5 "Hikari"
- Update to core espressif32@3.2
- Fixed IR pin not configurable
#### Build 2103290
- Version bump to 0.12.0-b4 "Hikari"
- Experimental use of espressif32@3.1.1
- Fixed RGBW mode disabled after LED settings saved
- Fixed infrared support not compiled in if IRPIN is not defined
#### Build 2103230
- Fixed current estimation
#### Build 2103220
- Version bump to 0.12.0-b2 "Hikari"
- Worked around an issue causing a critical decrease in framerate (wled.cpp l.240 block)
- Bump to Espalexa v2.7.0, fixing discovery
#### Build 2103210
- Version bump to 0.12.0-b1 "Hikari"
- More colors visible on Palette preview
- Fixed chevron icon not included
- Fixed color order override
- Cleanup
#### Build 2103200
- Version bump to 0.12.0-b0 "Hikari"
- Added palette preview and search (PR #1637)
- Added Reverse checkbox for PWM busses - reverses logic level for on
- Fixed various problems with the Playlist feature (PR #1724)
- Replaced "Layer" icon with "i" icon for Info button
- Chunchun effect more fitting for various segment lengths (PR #1804)
- Removed global reverse (in favor of individual bus reverse)
- Removed some unused icons from UI icon font
#### Build 2103130
- Added options for Auto Node discovery
- Optimized strings (no string both F() and raw)
#### Build 2103090
- Added Auto Node discovery (PR #1683)
- Added tooltips to quick color selectors for accessibility
#### Build 2103060
- Auto start field population in bus config
#### Build 2103050
- Fixed incorrect over-memory indication in LED settings on ESP32
#### Build 2103041
- Added destructor for BusPwm (fixes #1789)
#### Build 2103040
- Fixed relay mode inverted when upgrading from 0.11.0
- Fixed no more than 2 pins per bus configurable in UI
- Changed to non-linear IR brightness steps (PR #1742)
- Fixed various warnings (PR #1744)
- Added UDP DNRGBW Mode (PR #1704)
- Added dynamic LED mapping with ledmap.json file (PR #1738)
- Added support for QuinLED-ESP32-Ethernet board
- Added support for WESP32 ethernet board (PR #1764)
- Added Caching for main UI (PR #1704)
- Added Tetrix mode (PR #1729)
- Added memory check on Bus creation
#### Build 2102050
- Version bump to 0.12.0-a0 "Hikari"
- Added FPS indication in info
- Bumped max outputs from 7 to 10 busses for ESP32
#### Build 2101310
- First alpha configurable multipin
#### Build 2101130
- Added color transitions for all segments and slots and for segment brightness
- Fixed bug that prevented setting a boot preset higher than 25
#### Build 2101040
- Replaced Red & Blue effect with Aurora effect (PR #1589)
- Fixed HTTP changing segments uncommanded (#1618)
- Updated copyright year and contributor page link
#### Build 2012311
- Fixed Countdown mode
#### Build 2012310
- (Hopefully actually) fixed display of usermod values in info screen
#### Build 2012240
- Fixed display of usermod values in info screen
- 4 more effects now use FRAMETIME
- Remove unsupported environments from platformio.ini
#### Build 2012210
- Split index.htm in separate CSS + JS files (PR #1542)
- Minify UI HTML, saving >1.5kB flash
- Fixed JShint warnings
#### Build 2012180
- Boot brightness 0 will now use the brightness from preset
- Add iOS scrolling momentum (from PR #1528)
### WLED release 0.11.1
#### Build 2012180
- Release of WLED 0.11.1 "Mirai"
- Fixed AP hide not saving (fixes #1520)
- Fixed MQTT password re-transmitted to HTML
- Hide Update buttons while uploading, accept .bin
- Make sure AP password is at least 8 characters long
### Development versions after 0.11.0 release
#### Build 2012160
- Bump Espalexa to 2.5.0, fixing discovery (PR Espalexa/#152, originally PR #1497)
#### Build 2012150
- Added Blends FX (PR #1491)
- Fixed an issue that made it impossible to deactivate timed presets
#### Build 2012140
- Added Preset ID quick display option (PR #1462)
- Fixed LEDs not turning on when using gamma correct brightness and LEDPIN 2 (default)
- Fixed notifier applying main segment to selected segments on notification with FX/Col disabled
#### Build 2012130
- Fixed RGBW mode not saved between reboots (fixes #1457)
- Added brightness scaling in palette function for default (PR #1484)
#### Build 2012101
- Fixed preset cycle default duration rounded down to nearest 10sec interval (#1458)
- Enabled E1.31/DDP/Art-Net in AP mode
#### Build 2012100
- Fixed multi-segment preset cycle
- Fixed EEPROM (pre-0.11 settings) not cleared on factory reset
- Fixed an issue with intermittent crashes on FX change (PR #1465)
- Added function to know if strip is updating (PR #1466)
- Fixed using colorwheel sliding the UI (PR #1459)
- Fixed analog clock settings not saving (PR #1448)
- Added Temperature palette (PR #1430)
- Added Candy cane FX (PR #1445)
#### Build 2012020
- UDP `parsePacket()` with sync disabled (#1390)
- Added Multi RGBW DMX mode (PR #1383)
#### Build 2012010
- Fixed compilation for analog (PWM) LEDs
### WLED version 0.11.0
#### Build 2011290
- Release of WLED 0.11.0 "Mirai"
- Workaround for weird empty %f Espalexa issue
- Fixed crash on saving preset with HTTP API `PS`
- Improved performance for color changes in non-main segment
#### Build 2011270
- Added tooltips for speed and intensity sliders (PR #1378)
- Moved color order to NpbWrapper.h
- Added compile time define to override the color order for a specific range
#### Build 2011260
- Add `live` property to state, allowing toggling of realtime (not incl. in state resp.)
- PIO environment changes
#### Build 2011230
- Version bump to 0.11.0 "Mirai"
- Improved preset name sorting
- Fixed Preset cycle not working beyond preset 16
### Development versions between 0.10.2 and 0.11.0 releases
#### Build 2011220
- Fixed invalid save when modifying preset before refresh (might be related to #1361)
- Fixed brightness factor ignored on realtime timeout (fixes #1363)
- Fixed Phase and Chase effects with LED counts >256 (PR #1366)
#### Build 2011210
- Fixed Brightness slider beneath color wheel not working (fixes #1360)
- Fixed invalid UI state after saving modified preset
#### Build 2011200
- Added HEX color receiving to JSON API with `"col":["RRGGBBWW"]` format
- Moved Kelvin color receiving in JSON API from `"col":[[val]]` to `"col":[val]` format
_Notice:_ This is technically a breaking change. Since no release was made since the introduction and the Kelvin property was not previously documented in the wiki,
impact should be minimal.
- BTNPIN can now be disabled by setting to -1 (fixes #1237)
#### Build 2011180
- Platformio.ini updates and streamlining (PR #1266)
- my_config.h custom compile settings system (not yet used for much, adapted from PR #1266)
- Added Hawaii timezone (HST)
- Linebreak after 5 quick select buttons
#### Build 2011154
- Fixed RGBW saved incorrectly
- Fixed pmt caching requesting /presets.json too often
- Fixed deEEP not copying the first segment of EEPROM preset 16
#### Build 2011153
- Fixed an ESP32 end-of-file issue
- Fixed strip.isRgbw not read from cfg.json
#### Build 2011152
- Version bump to 0.11.0p "Mirai"
- Increased max. num of segments to 12 (ESP8266) / 16 (ESP32)
- Up to 250 presets stored in the `presets.json` file in filesystem
- Complete overhaul of the Presets UI tab
- Updated iro.js to v5 (fixes black color wheel)
- Added white temperature slider to color wheel
- Add JSON settings serialization/deserialization to cfg.json and wsec.json
- Added deEEP to convert the EEPROM settings and presets to files
- Playlist support - JSON only for now
- New v2 usermod methods `addToConfig()` and `readFromConfig()` (see EXAMPLE_v2 for doc)
- Added Ethernet support for ESP32 (PR #1316)
- IP addresses are now handled by the `Network` class
- New `esp32_poe` PIO environment
- Use EspAsyncWebserver Aircoookie fork v.2.0.0 (hiding wsec.json)
- Removed `WLED_DISABLE_FILESYSTEM` and `WLED_ENABLE_FS_SERVING` defines as they are now required
- Added pin manager
- UI performance improvements (no drop shadows)
- More explanatory error messages in UI
- Improved candle brightness
- Return remaining nightlight time `nl.rem` in JSON API (PR #1302)
- UI sends timestamp with every command, allowing for timed presets without using NTP
- Added gamma calculation (yet unused)
- Added LED type definitions to const.h (yet unused)
- Added nicer 404 page
- Removed `NP` and `MS=` macro HTTP API commands
- Removed macros from Time settings
#### Build 2011120
- Added the ability for the /api MQTT topic to receive JSON API payloads
#### Build 2011040
- Inversed Rain direction (fixes #1147)
#### Build 2011010
- Re-added previous C9 palette
- Renamed new C9 palette
#### Build 2010290
- Colorful effect now supports palettes
- Added C9 2 palette (#1291)
- Improved C9 palette brightness by 12%
- Disable onboard LED if LEDs are off (PR #1245)
- Added optional status LED (PR #1264)
- Realtime max. brightness now honors brightness factor (fixes #1271)
- Updated ArduinoJSON to 6.17.0
#### Build 2010020
- Fixed interaction of `T` and `NL` HTTP API commands (#1214)
- Fixed an issue where Sunrise mode nightlight does not activate if toggled on simultaneously
#### Build 2009291
- Fixed MQTT bootloop (no F() macro, #1199)
#### Build 2009290
- Added basic DDP protocol support
- Added Washing Machine effect (PR #1208)
#### Build 2009260
- Added Loxone parser (PR #1185)
- Added support for kelvin input via `K=` HTTP and `"col":[[val]]` JSON API calls
_Notice:_ `"col":[[val]]` removed in build 2011200, use `"col":[val]`
- Added supplementary UDP socket (#1205)
- TMP2.net receivable by default
- UDP sockets accept HTTP and JSON API commands
- Fixed missing timezones (#1201)
#### Build 2009202
- Fixed LPD8806 compilation
#### Build 2009201
- Added support for preset cycle toggling using CY=2
- Added ESP32 touch pin support (#1190)
- Fixed modem sleep on ESP8266 (#1184)
#### Build 2009200
- Increased available heap memory by 4kB
- Use F() macro for the majority of strings
- Restructure timezone code
- Restructured settings saved code
- Updated ArduinoJSON to 6.16.1
#### Build 2009170
- New WLED logo on Welcome screen (#1164)
- Fixed 170th pixel dark in E1.31
#### Build 2009100
- Fixed sunrise mode not reinitializing
- Fixed passwords not clearable
#### Build 2009070
- New Segments are now initialized with default speed and intensity
#### Build 2009030
- Fixed bootloop if mDNS is used on builds without OTA support
### WLED version 0.10.2
#### Build 2008310
- Added new logo
- Maximum GZIP compression (#1126)
- Enable WebSockets by default
### Development versions between 0.10.0 and 0.10.2 releases
#### Build 2008300
- Added new UI customization options to UI settings
- Added Dancing Shadows effect (#1108)
- Preset cycle is now paused if lights turned off or nightlight active
- Removed `esp01` and `esp01_ota` envs from travis build (need too much flash)
#### Build 2008290
- Added individual LED control support to JSON API
- Added internal Segment Freeze/Pause option
#### Build 2008250
- Made `platformio_override.ini` example easier to use by including the `default_envs` property
- FastLED uses `now` as timer, so effects using e.g. `beatsin88()` will sync correctly
- Extended the speed range of Pacifica effect
- Improved TPM2.net receiving (#1100)
- Fixed exception on empty MQTT payload (#1101)
#### Build 2008200
- Added segment mirroring to web UI
- Fixed segment mirroring when in reverse mode
#### Build 2008140
- Removed verbose live mode info from `<ds>` in HTTP API response
#### Build 2008100
- Fixed Auto White mode setting (fixes #1088)
#### Build 2008070
- Added segment mirroring (`mi` property) (#1017)
- Fixed DMX settings page not displayed (#1070)
- Fixed ArtNet multi universe and improve code style (#1076)
- Renamed global var `local` to `localTime` (#1078)
#### Build 2007190
- Fixed hostname containing illegal characters (#1035)
#### Build 2006251
- Added `SV=2` to HTTP API, allow selecting single segment only
#### Build 2006250
- Fix Alexa not turning off white channel (fixes #1012)
#### Build 2006220
- Added Sunrise nightlight mode
- Added Chunchun effect
- Added `LO` (live override) command to HTTP API
- Added `mode` to `nl` object of JSON state API, deprecating `fade`
- Added light color scheme support to web UI (click sun next to brightness slider)
- Added option to hide labels in web UI (click flame icon next to intensity slider)
- Added hex color input (click palette icon next to palette select) (resolves #506)
- Added support for RGB sliders (need to set in localstorage)
- Added support for custom background color or image (need to set in localstorage)
- Added option to hide bottom tab bar in PC mode (need to set in localstorage)
- Fixed transition lag with multiple segments (fixes #985)
- Changed Nightlight wording (resolves #940)
#### Build 2006060
- Added five effects by Andrew Tuline (Phased, Phased Noise, Sine, Noise Pal and Twinkleup)
- Added two new effects by Aircoookie (Sunrise and Flow)
- Added US-style sequence to traffic light effect
- Merged pull request #964 adding 9 key IR remote
#### Build 2005280
- Added v2 usermod API
- Added v2 example usermod `usermod_v2_example` in the usermods folder as prelimary documentation
- Added DS18B20 Temperature usermod with Info page support
- Disabled MQTT on ESP01 build to make room in flash
#### Build 2005230
- Fixed TPM2
#### Build 2005220
- Added TPM2.NET protocol support (need to set WLED broadcast UDP port to 65506)
- Added TPM2 protocol support via Serial
- Support up to 6553 seconds preset cycle durations (backend, NOT yet in UI)
- Merged pull request #591 fixing WS2801 color order
- Merged pull request #858 adding fully featured travis builds
- Merged pull request #862 adding DMX proxy feature
#### Build 2005100
- Update to Espalexa v2.4.6 (+1.6kB free heap memory)
- Added `m5atom` PlatformIO environment
#### Build 2005090
- Default to ESP8266 Arduino core v2.7.1 in PlatformIO
- Fixed Preset Slot 16 always indicating as empty (#891)
- Disabled Alexa emulation by default (causes bootloop for some users)
- Added BWLT11 and SHOJO_PCB defines to NpbWrapper
- Merged pull request #898 adding Solid Glitter effect
### WLED version 0.10.0
#### Build 2005030
- DMX Single RGW and Single DRGB modes now support an additional white channel
- Improved palettes derived from set colors and changed their names
### Development versions between 0.9.1 and 0.10.0 release
#### Build 2005020
- Added ACST and ACST/ACDT timezones
#### Build 2005010
- Added module info page to web UI
- Added realtime override functionality to web UI
- Added individial segment power and brightness to web UI
- Added feature to one-click select single segment only by tapping segment name
- Removed palette jumping to default if color is changed
#### Build 2004300
- Added realtime override option and `lor` JSON property
- Added `lm` (live mode) and `lip` (live IP) properties to info in JSON API
- Added reset commands to APIs
- Added `json/si`, returning state and info, but no FX or Palette lists
- Added rollover detection to millis(). Can track uptimes longer than 49 days
- Attempted to fix Wifi issues with Unifi brand APs
#### Build 2004230
- Added brightness and power for individual segments
- Added `on` and `bri` properties to Segment object in JSON API
- Added `C3` an `SB` commands to HTTP get API
- Merged pull request #865 for 5CH_Shojo_PCB environment
#### Build 2004220
- Added Candle Multi effect
- Added Palette capability to Pacifica effect
#### Build 2004190
- Added TM1814 type LED defines
#### Build 2004120
- Added Art-Net support
- Added OTA platform to platformio.ini
#### Build 2004100
- Fixed DMX output compilation
- Added DMX start LED setting
#### Build 2004061
- Fixed RBG and BGR getPixelColor (#825)
- Improved formatting
#### Build 2004060
- Consolidated global variables in wled.h
#### Build 2003300
- Major change of project structure from .ino to .cpp and func_declare.h
#### Build 2003262
- Fixed compilation for Analog LEDs
- Fixed sync settings network port fields too small
#### Build 2003261
- Fixed live preview not displaying whole light if over 255 LEDs
#### Build 2003251
- Added Pacifica effect (tentative, doesn't yet support other colors)
- Added Atlantica palette
- Fixed ESP32 build of Espalexa
#### Build 2003222
- Fixed Alexa Whites on non-RGBW lights (bump Espalexa to 2.4.5)
#### Build 2003221
- Moved Cronixie driver from FX library to drawOverlay handler
#### Build 2003211
- Added custom mapping compile define to FX_fcn.h
- Merged pull request #784 by @TravisDean: Fixed initialization bug when toggling skip first
- Added link to youtube videos by Room31 to readme
#### Build 2003141
- Fixed color of main segment returned in JSON API during transition not being target color (closes #765)
- Fixed arlsLock() being called after pixels set in E1.31 (closes #772)
- Fixed HTTP API calls not having an effect if no segment selected (now applies to main segment)
#### Build 2003121
- Created changelog.md - make tracking changes to code easier
- Merged pull request #766 by @pille: Fix E1.31 out-of sequence detection
Reference in New Issue View Git Blame Copy Permalink