WLED/wled00/bus_manager.h

#ifndef BusManager_h
#define BusManager_h

/*
 * Class for addressing various light types
 */

#include "const.h"
#include "pin_manager.h"
#include "bus_wrapper.h"
#include <Arduino.h>

//colors.cpp
uint32_t colorBalanceFromKelvin(uint16_t kelvin, uint32_t rgb);
void colorRGBtoRGBW(byte* rgb);

// enable additional debug output
#ifdef WLED_DEBUG
  #ifndef ESP8266
  #include <rom/rtc.h>
  #endif
  #define DEBUG_PRINT(x) Serial.print(x)
  #define DEBUG_PRINTLN(x) Serial.println(x)
  #define DEBUG_PRINTF(x...) Serial.printf(x)
#else
  #define DEBUG_PRINT(x)
  #define DEBUG_PRINTLN(x)
  #define DEBUG_PRINTF(x...)
#endif

#define GET_BIT(var,bit)    (((var)>>(bit))&0x01)
#define SET_BIT(var,bit)    ((var)|=(uint16_t)(0x0001<<(bit)))
#define UNSET_BIT(var,bit)  ((var)&=(~(uint16_t)(0x0001<<(bit))))

//color mangling macros
#define RGBW32(r,g,b,w) (uint32_t((byte(w) << 24) | (byte(r) << 16) | (byte(g) << 8) | (byte(b))))
#define R(c) (byte((c) >> 16))
#define G(c) (byte((c) >> 8))
#define B(c) (byte(c))
#define W(c) (byte((c) >> 24))

//temporary struct for passing bus configuration to bus
struct BusConfig {
  uint8_t type;
  uint16_t count;
  uint16_t start;
  uint8_t colorOrder;
  bool reversed;
  uint8_t skipAmount;
  bool refreshReq;
  uint8_t autoWhite;
  uint8_t pins[5] = {LEDPIN, 255, 255, 255, 255};
  BusConfig(uint8_t busType, uint8_t* ppins, uint16_t pstart, uint16_t len = 1, uint8_t pcolorOrder = COL_ORDER_GRB, bool rev = false, uint8_t skip = 0, byte aw=RGBW_MODE_MANUAL_ONLY) {
    refreshReq = (bool) GET_BIT(busType,7);
    type = busType & 0x7F;  // bit 7 may be/is hacked to include refresh info (1=refresh in off state, 0=no refresh)
    count = len; start = pstart; colorOrder = pcolorOrder; reversed = rev; skipAmount = skip; autoWhite = aw;
    uint8_t nPins = 1;
    if (type >= TYPE_NET_DDP_RGB && type < 96) nPins = 4; //virtual network bus. 4 "pins" store IP address
    else if (type > 47) nPins = 2;
    else if (type > 40 && type < 46) nPins = NUM_PWM_PINS(type);
    for (uint8_t i = 0; i < nPins; i++) pins[i] = ppins[i];
  }

  //validates start and length and extends total if needed
  bool adjustBounds(uint16_t& total) {
    if (!count) count = 1;
    if (count > MAX_LEDS_PER_BUS) count = MAX_LEDS_PER_BUS;
    if (start >= MAX_LEDS) return false;
    //limit length of strip if it would exceed total permissible LEDs
    if (start + count > MAX_LEDS) count = MAX_LEDS - start;
    //extend total count accordingly
    if (start + count > total) total = start + count;
    return true;
  }
};

// Defines an LED Strip and its color ordering.
struct ColorOrderMapEntry {
  uint16_t start;
  uint16_t len;
  uint8_t colorOrder;
};

struct ColorOrderMap {
  void add(uint16_t start, uint16_t len, uint8_t colorOrder) {
    if (_count >= WLED_MAX_COLOR_ORDER_MAPPINGS) {
      return;
    }
    if (len == 0) {
      return;
    }
    if (colorOrder > COL_ORDER_MAX) {
      return;
    }
    _mappings[_count].start = start;
    _mappings[_count].len = len;
    _mappings[_count].colorOrder = colorOrder;
    _count++;
  }

  uint8_t count() const {
    return _count;
  }

  void reset() {
    _count = 0;
    memset(_mappings, 0, sizeof(_mappings));
  }

  const ColorOrderMapEntry* get(uint8_t n) const {
    if (n > _count) {
      return nullptr;
    }
    return &(_mappings[n]);
  }

  inline uint8_t IRAM_ATTR getPixelColorOrder(uint16_t pix, uint8_t defaultColorOrder) const {
    if (_count == 0) return defaultColorOrder;
    // upper nibble containd W swap information
    uint8_t swapW = defaultColorOrder >> 4;
    for (uint8_t i = 0; i < _count; i++) {
      if (pix >= _mappings[i].start && pix < (_mappings[i].start + _mappings[i].len)) {
        return _mappings[i].colorOrder | (swapW << 4);
      }
    }
    return defaultColorOrder;
  }

  private:
  uint8_t _count;
  ColorOrderMapEntry _mappings[WLED_MAX_COLOR_ORDER_MAPPINGS];
};

//parent class of BusDigital, BusPwm, and BusNetwork
class Bus {
  public:
    Bus(uint8_t type, uint16_t start, uint8_t aw) {
      _type = type;
      _start = start;
      _autoWhiteMode = Bus::isRgbw(_type) ? aw : RGBW_MODE_MANUAL_ONLY;
    };

    virtual ~Bus() {} //throw the bus under the bus

    virtual void     show() {}
    virtual bool     canShow() { return true; }
    virtual void     setStatusPixel(uint32_t c) {}
    virtual void     setPixelColor(uint16_t pix, uint32_t c) {}
    virtual uint32_t getPixelColor(uint16_t pix) { return 0; }
    virtual void     setBrightness(uint8_t b) {}
    virtual void     cleanup() {}
    virtual uint8_t  getPins(uint8_t* pinArray) { return 0; }
    virtual uint16_t getLength() { return _len; }
    virtual void     setColorOrder() {}
    virtual uint8_t  getColorOrder() { return COL_ORDER_RGB; }
    virtual uint8_t  skippedLeds() { return 0; }
    inline  uint16_t getStart() { return _start; }
    inline  void     setStart(uint16_t start) { _start = start; }
    inline  uint8_t  getType() { return _type; }
    inline  bool     isOk() { return _valid; }
    inline  bool     isOffRefreshRequired() { return _needsRefresh; }
            bool     containsPixel(uint16_t pix) { return pix >= _start && pix < _start+_len; }

    virtual bool isRgbw() { return Bus::isRgbw(_type); }
    static  bool isRgbw(uint8_t type) {
      if (type == TYPE_SK6812_RGBW || type == TYPE_TM1814) return true;
      if (type > TYPE_ONOFF && type <= TYPE_ANALOG_5CH && type != TYPE_ANALOG_3CH) return true;
      return false;
    }
    virtual bool hasRGB() {
      if (_type == TYPE_WS2812_1CH || _type == TYPE_WS2812_WWA || _type == TYPE_ANALOG_1CH || _type == TYPE_ANALOG_2CH || _type == TYPE_ONOFF) return false;
      return true;
    }
    virtual bool hasWhite() {
      if (_type == TYPE_SK6812_RGBW || _type == TYPE_TM1814 || _type == TYPE_WS2812_1CH || _type == TYPE_WS2812_WWA ||
          _type == TYPE_ANALOG_1CH || _type == TYPE_ANALOG_2CH || _type == TYPE_ANALOG_4CH || _type == TYPE_ANALOG_5CH) return true;
      return false;
    }
    static void setCCT(uint16_t cct) {
      _cct = cct;
    }
		static void setCCTBlend(uint8_t b) {
			if (b > 100) b = 100;
			_cctBlend = (b * 127) / 100;
			//compile-time limiter for hardware that can't power both white channels at max
			#ifdef WLED_MAX_CCT_BLEND
				if (_cctBlend > WLED_MAX_CCT_BLEND) _cctBlend = WLED_MAX_CCT_BLEND;
			#endif
		}
		inline        void    setAWMode(uint8_t m)        { if (m < 4) _autoWhiteMode = m; }
		inline        uint8_t getAWMode()                 { return _autoWhiteMode; }
    inline static void    setAutoWhiteMode(uint8_t m) { if (m < 4) _gAWM = m; else _gAWM = 255; }
    inline static uint8_t getAutoWhiteMode()          { return _gAWM; }

    bool reversed = false;

  protected:
    uint8_t  _type = TYPE_NONE;
    uint8_t  _bri = 255;
    uint16_t _start = 0;
    uint16_t _len = 1;
    bool     _valid = false;
    bool     _needsRefresh = false;
    uint8_t  _autoWhiteMode;
    static uint8_t _gAWM;     // definition in FX_fcn.cpp
    static int16_t _cct;      // definition in FX_fcn.cpp
		static uint8_t _cctBlend; // definition in FX_fcn.cpp
  
    uint32_t autoWhiteCalc(uint32_t c) {
      uint8_t aWM = _autoWhiteMode;
      if (_gAWM < 255) aWM = _gAWM;
      if (aWM == RGBW_MODE_MANUAL_ONLY) return c;
      uint8_t w = W(c);
      //ignore auto-white calculation if w>0 and mode DUAL (DUAL behaves as BRIGHTER if w==0)
      if (w > 0 && aWM == RGBW_MODE_DUAL) return c;
      uint8_t r = R(c);
      uint8_t g = G(c);
      uint8_t b = B(c);
      w = r < g ? (r < b ? r : b) : (g < b ? g : b);
      if (aWM == RGBW_MODE_AUTO_ACCURATE) { r -= w; g -= w; b -= w; } //subtract w in ACCURATE mode
      return RGBW32(r, g, b, w);
    }
};


class BusDigital : public Bus {
  public:
  BusDigital(BusConfig &bc, uint8_t nr, const ColorOrderMap &com) : Bus(bc.type, bc.start, bc.autoWhite), _colorOrderMap(com) {
    if (!IS_DIGITAL(bc.type) || !bc.count) return;
    if (!pinManager.allocatePin(bc.pins[0], true, PinOwner::BusDigital)) return;
    _pins[0] = bc.pins[0];
    if (IS_2PIN(bc.type)) {
      if (!pinManager.allocatePin(bc.pins[1], true, PinOwner::BusDigital)) {
        cleanup(); return;
      }
      _pins[1] = bc.pins[1];
    }
    reversed = bc.reversed;
    _needsRefresh = bc.refreshReq || bc.type == TYPE_TM1814;
    _skip = bc.skipAmount;    //sacrificial pixels
    _len = bc.count + _skip;
    _iType = PolyBus::getI(bc.type, _pins, nr);
    if (_iType == I_NONE) return;
    _busPtr = PolyBus::create(_iType, _pins, _len, nr);
    _valid = (_busPtr != nullptr);
    _colorOrder = bc.colorOrder;
    DEBUG_PRINTF("Successfully inited strip %u (len %u) with type %u and pins %u,%u (itype %u)\n",nr, _len, bc.type, _pins[0],_pins[1],_iType);
  };

  inline void show() {
    PolyBus::show(_busPtr, _iType);
  }

  inline bool canShow() {
    return PolyBus::canShow(_busPtr, _iType);
  }

  void setBrightness(uint8_t b) {
    //Fix for turning off onboard LED breaking bus
    #ifdef LED_BUILTIN
    if (_bri == 0 && b > 0) {
      if (_pins[0] == LED_BUILTIN || _pins[1] == LED_BUILTIN) PolyBus::begin(_busPtr, _iType, _pins); 
    }
    #endif
    _bri = b;
    PolyBus::setBrightness(_busPtr, _iType, b);
  }

	//If LEDs are skipped, it is possible to use the first as a status LED.
	//TODO only show if no new show due in the next 50ms
	void setStatusPixel(uint32_t c) {
    if (_skip && canShow()) {
      PolyBus::setPixelColor(_busPtr, _iType, 0, c, _colorOrderMap.getPixelColorOrder(_start, _colorOrder));
      PolyBus::show(_busPtr, _iType);
    }
  }

  void setPixelColor(uint16_t pix, uint32_t c) {
    if (_type == TYPE_SK6812_RGBW || _type == TYPE_TM1814) c = autoWhiteCalc(c);
    if (_cct >= 1900) c = colorBalanceFromKelvin(_cct, c); //color correction from CCT
    if (reversed) pix = _len - pix -1;
    else pix += _skip;
    PolyBus::setPixelColor(_busPtr, _iType, pix, c, _colorOrderMap.getPixelColorOrder(pix+_start, _colorOrder));
  }

  uint32_t getPixelColor(uint16_t pix) {
    if (reversed) pix = _len - pix -1;
    else pix += _skip;
    return PolyBus::getPixelColor(_busPtr, _iType, pix, _colorOrderMap.getPixelColorOrder(pix+_start, _colorOrder));
  }

  inline uint8_t getColorOrder() {
    return _colorOrder;
  }

  uint16_t getLength() {
    return _len - _skip;
  }

  uint8_t getPins(uint8_t* pinArray) {
    uint8_t numPins = IS_2PIN(_type) ? 2 : 1;
    for (uint8_t i = 0; i < numPins; i++) pinArray[i] = _pins[i];
    return numPins;
  }

  void setColorOrder(uint8_t colorOrder) {
    // upper nibble contains W swap information
    if ((colorOrder & 0x0F) > 5) return;
    _colorOrder = colorOrder;
  }

  inline uint8_t skippedLeds() {
    return _skip;
  }

  inline void reinit() {
    PolyBus::begin(_busPtr, _iType, _pins);
  }

  void cleanup() {
    DEBUG_PRINTLN(F("Digital Cleanup."));
    PolyBus::cleanup(_busPtr, _iType);
    _iType = I_NONE;
    _valid = false;
    _busPtr = nullptr;
    pinManager.deallocatePin(_pins[1], PinOwner::BusDigital);
    pinManager.deallocatePin(_pins[0], PinOwner::BusDigital);
  }

  ~BusDigital() {
    cleanup();
  }

  private: 
  uint8_t _colorOrder = COL_ORDER_GRB;
  uint8_t _pins[2] = {255, 255};
  uint8_t _iType = I_NONE;
  uint8_t _skip = 0;
  void * _busPtr = nullptr;
  const ColorOrderMap &_colorOrderMap;
};


class BusPwm : public Bus {
  public:
  BusPwm(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWhite) {
    _valid = false;
    if (!IS_PWM(bc.type)) return;
    uint8_t numPins = NUM_PWM_PINS(bc.type);

    #ifdef ESP8266
    analogWriteRange(255);  //same range as one RGB channel
    analogWriteFreq(WLED_PWM_FREQ);
    #else
    _ledcStart = pinManager.allocateLedc(numPins);
    if (_ledcStart == 255) { //no more free LEDC channels
      deallocatePins(); return;
    }
    #endif

    for (uint8_t i = 0; i < numPins; i++) {
      uint8_t currentPin = bc.pins[i];
      if (!pinManager.allocatePin(currentPin, true, PinOwner::BusPwm)) {
        deallocatePins(); return;
      }
      _pins[i] = currentPin; //store only after allocatePin() succeeds
      #ifdef ESP8266
      pinMode(_pins[i], OUTPUT);
      #else
      ledcSetup(_ledcStart + i, WLED_PWM_FREQ, 8);
      ledcAttachPin(_pins[i], _ledcStart + i);
      #endif
    }
    reversed = bc.reversed;
    _valid = true;
  };

  void setPixelColor(uint16_t pix, uint32_t c) {
    if (pix != 0 || !_valid) return; //only react to first pixel
		if (_type != TYPE_ANALOG_3CH) c = autoWhiteCalc(c);
    if (_cct >= 1900 && (_type == TYPE_ANALOG_3CH || _type == TYPE_ANALOG_4CH)) {
      c = colorBalanceFromKelvin(_cct, c); //color correction from CCT
    }
    uint8_t r = R(c);
    uint8_t g = G(c);
    uint8_t b = B(c);
    uint8_t w = W(c);
    uint8_t cct = 0; //0 - full warm white, 255 - full cold white
    if (_cct > -1) {
      if (_cct >= 1900)    cct = (_cct - 1900) >> 5;
      else if (_cct < 256) cct = _cct;
    } else {
      cct = (approximateKelvinFromRGB(c) - 1900) >> 5;
    }

		uint8_t ww, cw;
		#ifdef WLED_USE_IC_CCT
		ww = w;
		cw = cct;
		#else
		//0 - linear (CCT 127 = 50% warm, 50% cold), 127 - additive CCT blending (CCT 127 = 100% warm, 100% cold)
		if (cct       < _cctBlend) ww = 255;
		else ww = ((255-cct) * 255) / (255 - _cctBlend);

		if ((255-cct) < _cctBlend) cw = 255;
		else                       cw = (cct * 255) / (255 - _cctBlend);

		ww = (w * ww) / 255; //brightness scaling
		cw = (w * cw) / 255;
		#endif

    switch (_type) {
      case TYPE_ANALOG_1CH: //one channel (white), relies on auto white calculation
        _data[0] = w;
        break;
      case TYPE_ANALOG_2CH: //warm white + cold white
        _data[1] = cw;
        _data[0] = ww;
        break;
      case TYPE_ANALOG_5CH: //RGB + warm white + cold white
        _data[4] = cw;
        w = ww;
      case TYPE_ANALOG_4CH: //RGBW
        _data[3] = w;
      case TYPE_ANALOG_3CH: //standard dumb RGB
        _data[0] = r; _data[1] = g; _data[2] = b;
        break;
    }
  }

  //does no index check
  uint32_t getPixelColor(uint16_t pix) {
    if (!_valid) return 0;
    return RGBW32(_data[0], _data[1], _data[2], _data[3]);
  }

  void show() {
    if (!_valid) return;
    uint8_t numPins = NUM_PWM_PINS(_type);
    for (uint8_t i = 0; i < numPins; i++) {
      uint8_t scaled = (_data[i] * _bri) / 255;
      if (reversed) scaled = 255 - scaled;
      #ifdef ESP8266
      analogWrite(_pins[i], scaled);
      #else
      ledcWrite(_ledcStart + i, scaled);
      #endif
    }
  }

  inline void setBrightness(uint8_t b) {
    _bri = b;
  }

  uint8_t getPins(uint8_t* pinArray) {
    if (!_valid) return 0;
    uint8_t numPins = NUM_PWM_PINS(_type);
    for (uint8_t i = 0; i < numPins; i++) {
      pinArray[i] = _pins[i];
    }
    return numPins;
  }

  void cleanup() {
    deallocatePins();
  }

  ~BusPwm() {
    cleanup();
  }

  private: 
  uint8_t _pins[5] = {255, 255, 255, 255, 255};
  uint8_t _data[5] = {0};
  #ifdef ARDUINO_ARCH_ESP32
  uint8_t _ledcStart = 255;
  #endif

  void deallocatePins() {
    uint8_t numPins = NUM_PWM_PINS(_type);
    for (uint8_t i = 0; i < numPins; i++) {
      pinManager.deallocatePin(_pins[i], PinOwner::BusPwm);
      if (!pinManager.isPinOk(_pins[i])) continue;
      #ifdef ESP8266
      digitalWrite(_pins[i], LOW); //turn off PWM interrupt
      #else
      if (_ledcStart < 16) ledcDetachPin(_pins[i]);
      #endif
    }
    #ifdef ARDUINO_ARCH_ESP32
    pinManager.deallocateLedc(_ledcStart, numPins);
    #endif
  }
};


class BusOnOff : public Bus {
  public:
  BusOnOff(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWhite) {
    _valid = false;
    if (bc.type != TYPE_ONOFF) return;

    uint8_t currentPin = bc.pins[0];
    if (!pinManager.allocatePin(currentPin, true, PinOwner::BusOnOff)) {
      deallocatePins(); return;
    }
    _pin = currentPin; //store only after allocatePin() succeeds
    pinMode(_pin, OUTPUT);
    reversed = bc.reversed;
    _valid = true;
  };

  void setPixelColor(uint16_t pix, uint32_t c) {
    if (pix != 0 || !_valid) return; //only react to first pixel
		c = autoWhiteCalc(c);
    uint8_t r = R(c);
    uint8_t g = G(c);
    uint8_t b = B(c);
    uint8_t w = W(c);

    _data = bool((r+g+b+w) && _bri) ? 0xFF : 0;
  }

  uint32_t getPixelColor(uint16_t pix) {
    if (!_valid) return 0;
    return RGBW32(_data, _data, _data, _data);
  }

  void show() {
    if (!_valid) return;
    digitalWrite(_pin, reversed ? !(bool)_data : (bool)_data);
  }

  inline void setBrightness(uint8_t b) {
    _bri = b;
  }

  uint8_t getPins(uint8_t* pinArray) {
    if (!_valid) return 0;
    pinArray[0] = _pin;
    return 1;
  }

  void cleanup() {
    deallocatePins();
  }

  ~BusOnOff() {
    cleanup();
  }

  private: 
  uint8_t _pin = 255;
  uint8_t _data = 0;

  void deallocatePins() {
    pinManager.deallocatePin(_pin, PinOwner::BusOnOff);
  }
};


class BusNetwork : public Bus {
  public:
    BusNetwork(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWhite) {
      _valid = false;
//      switch (bc.type) {
//        case TYPE_NET_ARTNET_RGB:
//          _rgbw = false;
//          _UDPtype = 2;
//          break;
//        case TYPE_NET_E131_RGB:
//          _rgbw = false;
//          _UDPtype = 1;
//          break;
//        case TYPE_NET_DDP_RGB:
//          _rgbw = false;
//          _UDPtype = 0;
//          break;
//        default:
          _rgbw = false;
          _UDPtype = bc.type - TYPE_NET_DDP_RGB;
//          break;
//      }
      _UDPchannels = _rgbw ? 4 : 3;
      _data = (byte *)malloc(bc.count * _UDPchannels);
      if (_data == nullptr) return;
      memset(_data, 0, bc.count * _UDPchannels);
      _len = bc.count;
      _client = IPAddress(bc.pins[0],bc.pins[1],bc.pins[2],bc.pins[3]);
      _broadcastLock = false;
      _valid = true;
    };

  bool hasRGB() { return true; }
  bool hasWhite() { return _rgbw; }

  void setPixelColor(uint16_t pix, uint32_t c) {
    if (!_valid || pix >= _len) return;
		if (isRgbw()) c = autoWhiteCalc(c);
    if (_cct >= 1900) c = colorBalanceFromKelvin(_cct, c); //color correction from CCT
    uint16_t offset = pix * _UDPchannels;
    _data[offset]   = R(c);
    _data[offset+1] = G(c);
    _data[offset+2] = B(c);
    if (_rgbw) _data[offset+3] = W(c);
  }

  uint32_t getPixelColor(uint16_t pix) {
    if (!_valid || pix >= _len) return 0;
    uint16_t offset = pix * _UDPchannels;
    return RGBW32(_data[offset], _data[offset+1], _data[offset+2], _rgbw ? (_data[offset+3] << 24) : 0);
  }

  void show() {
    if (!_valid || !canShow()) return;
    _broadcastLock = true;
    realtimeBroadcast(_UDPtype, _client, _len, _data, _bri, _rgbw);
    _broadcastLock = false;
  }

  inline bool canShow() {
    // this should be a return value from UDP routine if it is still sending data out
    return !_broadcastLock;
  }

  inline void setBrightness(uint8_t b) {
    _bri = b;
  }

  uint8_t getPins(uint8_t* pinArray) {
    for (uint8_t i = 0; i < 4; i++) {
      pinArray[i] = _client[i];
    }
    return 4;
  }

  inline bool isRgbw() {
    return _rgbw;
  }

  inline uint16_t getLength() {
    return _len;
  }

  void cleanup() {
    _type = I_NONE;
    _valid = false;
    if (_data != nullptr) free(_data);
    _data = nullptr;
  }

  ~BusNetwork() {
    cleanup();
  }

  private:
    IPAddress _client;
    uint8_t   _bri = 255;
    uint8_t   _UDPtype;
    uint8_t   _UDPchannels;
    bool      _rgbw;
    bool      _broadcastLock;
    byte     *_data;
};


class BusManager {
  public:
  BusManager() {};

  //utility to get the approx. memory usage of a given BusConfig
  static uint32_t memUsage(BusConfig &bc) {
    uint8_t type = bc.type;
    uint16_t len = bc.count + bc.skipAmount;
    if (type > 15 && type < 32) {
      #ifdef ESP8266
        if (bc.pins[0] == 3) { //8266 DMA uses 5x the mem
          if (type > 29) return len*20; //RGBW
          return len*15;
        }
        if (type > 29) return len*4; //RGBW
        return len*3;
      #else //ESP32 RMT uses double buffer?
        if (type > 29) return len*8; //RGBW
        return len*6;
      #endif
    }
    if (type > 31 && type < 48)   return 5;
    if (type == 44 || type == 45) return len*4; //RGBW
    return len*3; //RGB
  }
  
  int add(BusConfig &bc) {
    if (numBusses >= WLED_MAX_BUSSES) return -1;
    if (bc.type >= TYPE_NET_DDP_RGB && bc.type < 96) {
      busses[numBusses] = new BusNetwork(bc);
    } else if (IS_DIGITAL(bc.type)) {
      busses[numBusses] = new BusDigital(bc, numBusses, colorOrderMap);
    } else {
      busses[numBusses] = new BusPwm(bc);
    }
    return numBusses++;
  }

  //do not call this method from system context (network callback)
  void removeAll() {
    DEBUG_PRINTLN(F("Removing all."));
    //prevents crashes due to deleting busses while in use. 
    while (!canAllShow()) yield();
    for (uint8_t i = 0; i < numBusses; i++) delete busses[i];
    numBusses = 0;
  }

  void show() {
    for (uint8_t i = 0; i < numBusses; i++) {
      busses[i]->show();
    }
  }

	void setStatusPixel(uint32_t c) {
    for (uint8_t i = 0; i < numBusses; i++) {
			busses[i]->setStatusPixel(c);
		}
	}

  void IRAM_ATTR setPixelColor(uint16_t pix, uint32_t c, int16_t cct=-1) {
    for (uint8_t i = 0; i < numBusses; i++) {
      Bus* b = busses[i];
      uint16_t bstart = b->getStart();
      if (pix < bstart || pix >= bstart + b->getLength()) continue;
      busses[i]->setPixelColor(pix - bstart, c);
    }
  }

  void setBrightness(uint8_t b) {
    for (uint8_t i = 0; i < numBusses; i++) {
      busses[i]->setBrightness(b);
    }
  }

  void setSegmentCCT(int16_t cct, bool allowWBCorrection = false) {
    if (cct > 255) cct = 255;
    if (cct >= 0) {
      //if white balance correction allowed, save as kelvin value instead of 0-255
      if (allowWBCorrection) cct = 1900 + (cct << 5);
    } else cct = -1;
    Bus::setCCT(cct);
  }

  uint32_t getPixelColor(uint16_t pix) {
    for (uint8_t i = 0; i < numBusses; i++) {
      Bus* b = busses[i];
      uint16_t bstart = b->getStart();
      if (pix < bstart || pix >= bstart + b->getLength()) continue;
      return b->getPixelColor(pix - bstart);
    }
    return 0;
  }

  bool canAllShow() {
    for (uint8_t i = 0; i < numBusses; i++) {
      if (!busses[i]->canShow()) return false;
    }
    return true;
  }

  Bus* getBus(uint8_t busNr) {
    if (busNr >= numBusses) return nullptr;
    return busses[busNr];
  }

  inline uint8_t getNumBusses() {
    return numBusses;
  }

  //semi-duplicate of strip.getLengthTotal() (though that just returns strip._length, calculated in finalizeInit())
  uint16_t getTotalLength() {
    uint16_t len = 0;
    for (uint8_t i=0; i<numBusses; i++) len += busses[i]->getLength();
    return len;
  }

  void updateColorOrderMap(const ColorOrderMap &com) {
    memcpy(&colorOrderMap, &com, sizeof(ColorOrderMap));
  }

  const ColorOrderMap& getColorOrderMap() const {
    return colorOrderMap;
  }

  private:
  uint8_t numBusses = 0;
  Bus* busses[WLED_MAX_BUSSES];
  ColorOrderMap colorOrderMap;
};
#endif