* Remove -w (Suppress all warnings, including those which GNU CPP issues by default.) and add back in -Wall (Turn on all optional warnings which are desirable for normal code.) from build_flags
* Fixes warning: suggest parentheses around '+' in operand of '&' [-Wparentheses]
* Fixes warning: "CONFIG_LITTLEFS_FOR_IDF_3_2" redefined
* Fixes warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
* Fixes warning: enumeration value 'onoff' not handled in switch [-Wswitch]
* Fixes warning: "ntohl" redefined, warning: "ntohs" redefined, warning: "htonl" redefined, warning: "htons" redefined
- Original fix: 858f8f4ee9
* Fixes warning: unused variable 'mainSeg' [-Wunused-variable]
* Fixes warning: unused variable 'start' [-Wunused-variable]
* (untested!) Fixes warning: operation on '...' may be undefined [-Wsequence-point]
* Fixes warning: unused variable
* Fixes warning: unused variable and warning: narrowing conversion
* Fixes warning: unused variable
* Fixes warning: unused variable
* (untested!) Fixes warning: statement has no effect [-Wunused-value]
* Fixes warning: control reaches end of non-void function
* Fixes warning: unused variable
* Fixes warning: left operand of comma operator has no effect
* Fixes warning: no return statement in function returning non-void
* (untested!) Fixes warning: ISO C++ forbids converting a string constant to 'char*' and fixes warning: unused variable 'nPins'
* Fixes warning: deleting array 'dmxData'
* Fixes warning: unused variable
* Remove all warning suppression buildflags
Co-authored-by: Louis Beaudoin <louis@embedded-creations.com>
Co-authored-by: Aircoookie <dev.aircoookie@gmail.com>
* Initial version of the PIR Staircase wipe up/down.
* Add pulldown reminder
* Workaround for missing D6 and D7 definitions on esp32dev
* Add pinouts for d1 mini (esp8266 and esp32) and NodeMCU (and Arduino)
* These IO pins on all these boards... NodeMCU and d1_mini esp32 supported. The others? Fingers crossed.
* Changed to not collide with led strip pins
* PIR on GPIO 15 and 16 on esp32 d1 mini
* Removed PIN number ifdefs, it is impossible to match all boards
* Settings in flash, info and API
* Update README.md
* Small doc changes
* Improved README
* Fixed error in reading configuration
* Add API documentation
* Documentation and code cleanup
* Add enable/disable to API settings
* Restore segment state when disabling plugin
* Add debounce
* Set segments in animation mode
* Set segments in animation mode
* Add support for HR04 sensors
* Add preliminary description for using an HR04 sensor
* Fixed typenumber and linked to datasheet
* Moved config away from defines to prevent user error
* Trigger Sensors through API
* Rename scripts folder so that it's name doesn't clash with the `pio` command (prevents platformIO in VSCode to work properly on Mac)
* Bugfix for detection problems
* Separated config from code
* Renamed Signal to Trigger pin
* Filename adjusted
* Clarifications and additions to README
* Fixed references to pio scripts
* Fixed API trigger bug
* Adjustments to README.md
* More efficient use of flash cycles, better naming
* Bugfix: bottom sensor was not read properly
* Renamed to Animated_Staircase
* Add note on ultrasonic sensor and esp32
* Better naming of defines
* Bugfix: Swipe down started with two steps.
* Removed upload port in nodemcuv2 section
Co-authored-by: Rolf <rolf@phobos.local>
Co-authored-by: Rolf <>
* Initial support for WT32-ETH01 board
* Initial ethernet config option, doesn't save yet
* Fixed saving/restoring ethernet option, works now!
* Fixed ESP32-POE pin config (thanks to tbnobody)
* Remove esp32_eth target (use poe), minor cleanup
* Fix BTNPIN for WT32-ETH01, as found by @k7bbr
* Various fixes to ethernet option
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
* Adding SensorsToMqtt usermod, which allows WLED to read bmp280/SI7021/CCS811 sensors and publish it via MQTT to e.g. Home Assistant.
* undo some changes we dont want upstream
* undo some changes we dont want upstream2
Co-authored-by: Machiel Pronk <machiel.pronk89@gmail.com>
Add support for ANAVI Miracle Controller open source hardware
development board with ESP8266. For the moment use a single LED
strip connected to LED1.
Signed-off-by: Leon Anavi <leon@anavi.org>
The Quin-Dig-Quad has the relay pin on IO19 (Q3). However, it is on IO12 by default. Update the build flags for the custom32_LEDPIN_16 build to also move the relay pin to IO19 so it works properly with the board.
This controller uses ESP8285 with 2MB built-in flash.
Features:
- LED string is connected to GPIO3,
- On/off button connected to GPIO1,
- Built-in transistors to drive non-addressable R-G-B-Wc-Ww strips
(by default not connected, only pads are present).
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* A separate socket for UDP api has been added. This uses the same API as HTML. Commands for Loxone were added to the API.
* html files for udp api newly generated
* codm pixel controller board configurations added to platformio.ini file
* Parser for LX/LY commands adapted. Calculation of the values corrected. Segment handling for LX/LY removed.
* Lox parser moved to own file. Lox parser added to the JSON api. Within a segment LX and LY are now supported.
* serial port removed
* F() macro added
Co-authored-by: Marius Groos <marius.groos@codm.de>
* Add touch option to button handler
* Check if touch is pressed in setup
* Add TOUCHPIN build env and override example
Co-authored-by: Aircoookie <dev.aircoookie@gmail.com>
The version requirement for the ESPAsyncUDP lib_dep has been causing failed builds in platformio and Travis-CI since 7/6/2020. Removing the version requirement fixes this issue.
Please see the error below:
`Looking for ESPAsyncUDP library in registry
Found: https://platformio.org/lib/show/359/ESPAsyncUDP
LibraryManager: Installing id=359 @ 697c75a025
UndefinedPackageVersion: Could not find a version that satisfies the requirement '697c75a025' for your system 'linux_x86_64':`
- Added Sunrise nightlight mode
- Added Chunchun effect
- Added `LO` (live override) command to HTTP API
- Added `mode` to `nl` object of JSON state API, deprecating `fade`
- Added light color scheme support to web UI (click sun next to brightness slider)
- Added option to hide labels in web UI (click flame icon next to intensity slider)
- Added hex color input (click palette icon next to palette select) (resolves#506)
- Added support for RGB sliders (need to set in localstorage)
- Added support for custom background color or image (need to set in localstorage)
- Added option to hide bottom tab bar in PC mode (need to set in localstorage)
- Fixed transition lag with multiple segments (fixes#985)
- Changed Nightlight wording (resolves#940)
* Adding new usermod for TTGO T-DIsplay.
* Finalizing the code
* Modified and cleaned up readme.md file
* Fixes to platformio.ini to restore back to previous state
* Cleaned up comments in usermod file
ESP32 fixes for Solid RGBW (...not implemented for ESP32 yet)
Use 5CH solid RGB stripes
adapt the logic to use CW and WW for different CT-values
change from Opt-out to Opt-In for analog LEDs
Added new boards
Alexa color changes to match white values with 4Ch and 5Ch LED stripes
bracket error
Device definitions
ESP32 fixes for Solid RGBW (...not implemented for ESP32 yet)
Use 5CH solid RGB stripes
adapt the logic to use CW and WW for different CT-values
change from Opt-out to Opt-In for analog LEDs
Added new boards
Alexa color changes to match white values with 4Ch and 5Ch LED stripes
2.4.2 was default and caused a boot loops on NodeMCU for me. Even erasing and re-flashing didn't solve the problem. With core 2.6.2 it seems to be fine.
