* Initial support for WT32-ETH01 board
* Initial ethernet config option, doesn't save yet
* Fixed saving/restoring ethernet option, works now!
* Fixed ESP32-POE pin config (thanks to tbnobody)
* Remove esp32_eth target (use poe), minor cleanup
* Fix BTNPIN for WT32-ETH01, as found by @k7bbr
* Various fixes to ethernet option
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
* Fix swipe behavior on firefox when clicking on palette selection input
When clicking on the palette select element on firefox, it would often swipe to the next tab due to a bug in firefox: https://bugzilla.mozilla.org/show_bug.cgi?id=1410816
* Update UI .h files and remove console log
* Added aurora effect
* Cosmetic changes prior to PR to match some guidelines
* Update FX.cpp
Moved mode_aurora function to end of FX.cpp
* Cosmetic changes prior to PR
- Changed new palette name to have a whitespace
- Undid changes to platformio.ini
* Removed commented out test palette
* Improved memory handling
Use SEGENV to allocate and manage dynamic memory needs of effect.
Only allocate as much memory as needed for current amount of waves set.
* Improvements to Aurora effect
- Smoother on low speed
- CRGB is trivially copiable
- Replaced Red & Blue mode
- Simplified logic and mem use a tiny bit
- Aurora2 palette a bit less yellowish
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
* Adding SensorsToMqtt usermod, which allows WLED to read bmp280/SI7021/CCS811 sensors and publish it via MQTT to e.g. Home Assistant.
* undo some changes we dont want upstream
* undo some changes we dont want upstream2
Co-authored-by: Machiel Pronk <machiel.pronk89@gmail.com>
* New Effect "TV Simulator"
based on "Fake TV Light for Engineers" by Phillip Burgess https://learn.adafruit.com/fake-tv-light-for-engineers/arduino-sketch
* removed some not-used functions
...from my 1st attempt with "Phoney TV" - but this one did not look good.
* Dynamic Effect extended with a "smooth" variant
...to close#1114 / the "Dynamice fade effect" in the projects section
Co-authored-by: Aircoookie <dev.aircoookie@gmail.com>
* New Effect "TV Simulator"
based on "Fake TV Light for Engineers" by Phillip Burgess https://learn.adafruit.com/fake-tv-light-for-engineers/arduino-sketch
* removed some not-used functions
...from my 1st attempt with "Phoney TV" - but this one did not look good.
* Created new version of tv_colors.h based on 18 movies
...and some corrections
* Add include guards for tv_colors.h and disable option
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
* Add fields for customization Blynk host
Add fields to 'Sync Interfaces' for customization Blynk host.
Now you can set you own Blynk server.
All you needs its set custom host and port to local Blync server.
* Lower blynk host length (memory usage)
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
Fixed AP hide not saving (fixes#1520)
Fixed MQTT password re-transmitted to HTML
Hide Update buttons while uploading, accept .bin
Make sure AP password is at least 8 characters long
* Removed usermod Fix_unreachable_webserver
* Changed README. Added a compiler warning for ESP32
* Fix ESP32 compiling issue. Add instance ptr API.
* Updated usermods. Store config values. ESP32 fix.
* Store analog clock settings
* Rename JSON values
bring them visually more in line with the other settings
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
* Prevent UI from sliding when using sliders (#1400)
An iro.js version bump in commit 98e4ac6 changed names for the slider &
colorwheel classes which made the filter in function lock() fail.
Also it seems that not all elements of the Iro sliders & colorwheel have
appropriate classes set. Just changing the names still sometimes failed
when the user accidentally grabbed a part of the slider / colorwheel
that has no class name set.
To mitigate this, lock() now checks the events classlist for classes
starting with "Iro" as well as it's parents classlist if no "Iro" classes
were found
* Regenerate wled00/html_ui.h
* Added Temperature Palette
Added cpt-city temperature_gp palette. Palette is nice combination of blues to reds to yellows. Reduced original cpt-city palette to 18 lines to fit WLED constraints. Tested palette and it visually is consistent with original cpt-city colors and look and works in WLED.
* Update palettes.h
* Update palettes.h
...in cfg.cpp the if statement used "IRPIN" (which is consistent to all other PIN names), but on the declaration-side "IR_PIN" was used.
Changed all occurences of "IR_PIN" to "IRPIN".
RGBW leds can be individually adressed through E1.31 control.
-Added option 'Multi RGBW' to the settings
-Modified e131.cpp accordingly
-Tuned other parameters to make it work
* Alexa RGBW Support
When adding an RGBW device to Alexa and then selecting a white color tone, Alexa will send CT values to the device. Having a warm white or cold white strip should use 100% of that strip and then add the RGB colors to get either a warmer color or a colder one.
* 40 keys IR Remote
Added IR remote with 40 keys to use with RGBW stripes.
* ESU8285 flash size corrected
* ESP32 fixes for Solid RGBW
...not implemented for ESP32 yet
ESP32 Solid RGBW defines
moved from env:esp32dev to env:esp32
ESP32 Solid RGBW defines
* Update readme.md
* Update readme.md
* Update readme.md
Update readme.md
* Use different IR remotes in the settings
To turn off IR remote use "0" in the settings, use 1 to 4 for different IR remote types.
* Use 5CH solid RGB stripes
adapt the logic to use CW and WW for different CT-values
* change from Opt-Out to Opt-In for solid (analoge) RGB stripes
Changed code from #define WLED_DISABLE_ANALOG_LEDS to #define WLED_USE_ANALOG_LEDS
* DEFINES for different devices added
* order of PINs alligned to hardware
* Update readme.md
* correct initialization of variable rgb[]
* SunRise Effect
NightLight used to brighten the light combined with fading from the actual (primary) color to the secondary color
* Fixed headline
RLYPIN definition dependant on WLED_USE_ANALOG_LEDS
Corrected list-item indents (readme.md)
updated to match upstream master (briLast in wled00.ino)
* Updates to adopt to upstream master
RLYPIN definition dependant on WLED_USE_ANALOG_LEDS
Fixed headline and corrected list-item indents (readme.md)
updated to match upstream master (briLast in wled00.ino)
* Sync with upstream master
* PIO ini correction
* sync of upstream readme.md
* FX intensity slider to desaturate Color in Colorloop FX
in default intensity (128) everything looks the same, decreasing the intensity will desaturate the color towards WHITE
* PIO changes
* adjusted linker scripts, debug settings etc.
* Override script updated accordingly
* ldscriipt for 1m0 adjusted
* backup files deleted
* deletion of wled00,ino.cpp
* remove travis build from PIO
* add custom builds to PIO
...to map the releases
* removed build_type = release (as this is default)
* updated to use espressif8266@2.3.3
...instead of espressif8266@2.3.2 (both on arduino 2.6.3)
* added more options to the PIO-override.ini
* analog, too
* build only 5 envs with Travis.CI
* should be include not exclude
* YAML correction
* next YAML
* UNDO
* some effects behave wrong with strips longer then 256 LEDs
This is particular true for the effects "Phased" and "Phased Noise" as well as for "Chase Rainbow".
The reason is that in this cases 256 is divided by SEGLEN and used in the formula, but with SEGLEN greater than 256 the integer result will always be ZERO.
Platformio.ini updates and streamlining (PR #1266)
my_config.h custom compile settings system (not yet used for much, adapted from PR #1266)
Linebreak after 5 quick select buttons
This returns the number of seconds remaining in the nightlight in the
"rem" field of the nightlight ("nl") state. If there is no nightlight
active, it returns -1.
The previous code only looked for certain keywords in the topic instead of comparing it completely.
For example if mqttDeviceTopic is set to "lights/colorRGB" the MQTT interface is unusable because
the search for "/col" will always return a match and therefore any MQTT command is interpreted as
a color.
The new code checks the full topic.
- Colorful effect now supports palettes
- Added C9 2 palette (#1291)
- Improved C9 palette brightness by 12%
- Disable onboard LED if LEDs are off (PR #1245)
- Added optional status LED (PR #1264)
- Realtime max. brightness now honors brightness factor (fixes#1271)
- Updated ArduinoJSON to 6.17.0
