Commit Graph

3727 Commits

Author SHA1 Message Date
Frank
c8fdf3731a upgrade to FastLED 3.6.0
changes from 3.50 to 3.6.0:
* bugfixes
* removed "register" keyword
* some speedups
* explicit bool() and uint32_t() operators, see https://github.com/FastLED/FastLED/issues/819

FX.cpp:  bugfix for "wled00/FX.cpp:4906:36:
error: cannot convert 'CRGB' to 'uint32_t' {aka 'unsigned int'} in initialization"
2023-07-20 22:36:47 +02:00
Frank
f8e766ffc0 add -S3 PSRAM (qio_opi) to nightly builds 2023-07-20 22:21:02 +02:00
Frank
050489dd80 allow Lolin Wifi Fix on -S3 2023-07-20 22:09:48 +02:00
Frank
2db966ba47 Improvements for -S3 with PSRAM
qio_opi:   PSRAM  8MB or 16MB
qio_qspi:  PSRAM  2MB or 4MB

fun fact: _opi and _qspi modes both require a special bootloader.
2023-07-20 22:09:14 +02:00
Frank
aa54d65f63 upgrade -S3/-S2/-C3 to platform 5.3.0
platform 5.3.0 = arduino-esp32 v2.0.6 + esp-idf v4.4.3

--> you will need new bootloader files for arduino-esp32 v2.0.6

--> coredumps are supported now, if you leave 64Kb of flash at the end of your partitions file (see example in wled_esp32_8MB.csv)
2023-07-20 21:39:25 +02:00
cschwinne
8ccf349458 Always repaint NPB buffer on brightness change
Fix bus re-init causing full brightness (every show() now attempts to set the brightness, bus will ignore this if it stays the same)
2023-07-19 17:25:25 +02:00
cschwinne
2fce15db94 Restore brightness immediately after show() 2023-07-19 16:22:34 +02:00
Blaz Kristan
0cf50e8000 FX Fireworks optimisation 2023-07-19 16:06:41 +02:00
cschwinne
5b9630cf46 Repaint NPB buffer on brightness updates 2023-07-19 13:50:09 +02:00
Blaz Kristan
7dcbb409a9 Trying to solve ABL bug.
(no more pulsing)
2023-07-18 23:33:28 +02:00
Frank
5ef7cd7bdd blur bugfix
turns out that fastLED 3.6.0 has an explicit uint32_t operator that returns RGBA, however  3.5.0 does not have this and the conversion returned only the "red" component".
2023-07-18 13:12:52 +02:00
Frank
ebb4628e66 Minor correction (slider names)
"Time delay" is actually "speed" - bigger values make the effect run faster.
2023-07-18 13:12:52 +02:00
Blaz Kristan
abfb8bbc34 Fix (almost good) for unbuffered ABL calculations. 2023-07-17 17:06:04 +02:00
Blaz Kristan
82e01f7b17 Fixed ABL calculation. 2023-07-17 16:15:17 +02:00
Blaz Kristan
f1e1bd41b9 Slight optimisation in BusDigial::getPixelColor() 2023-07-14 15:58:03 +02:00
Blaz Kristan
57d35858d8 Merge branch 'main' into alt-buffer 2023-07-14 15:39:18 +02:00
Blaz Kristan
0b956c66c1 changelog update 2023-07-14 13:07:33 +02:00
Blaž Kristan
b1dfa1db61
Merge pull request #3291 from Aircoookie/onoff-nodes
Add ability to toggle devices from nodes view.
2023-07-14 12:41:15 +02:00
Blaz Kristan
cb579ecc62 Broadcast change. 2023-07-14 11:07:35 +02:00
cschwinne
ae235aa58c Fix UI handling of in-between inactive segments 2023-07-14 01:12:19 +02:00
Blaz Kristan
6302056182 Add ability to toggle devices from nodes view. 2023-07-13 22:21:15 +02:00
cschwinne
5e20abd7f1 Move segment bounds queuing to WS2812FX 2023-07-13 13:08:36 +02:00
Frank
72a72dbc88
proper rounding of FPS 2023-07-13 12:49:19 +02:00
cschwinne
4766666913 Static queued segment bounds
(saves 180 bytes of RAM)
Fixed segment index not increasing on inactive segments
2023-07-13 03:09:42 +02:00
Blaz Kristan
fa6070c680 Multiple updates:
- additional debug timings
- removed local leds[] buffer
- async segment bounds change (crashes seen otherwise)
- added isActive() check to Segment drawing methods
- ABL simplification
- palette option for Black hole (FX)
- (possible) crash mitigation is Segment handling (rapid preset changes)
2023-07-12 20:52:34 +02:00
cschwinne
6267d11e51 Fix compilation and ABL scaling 2023-07-09 12:32:28 +02:00
Christian Schwinne
822298ab66
Merge branch 'main' into alt-buffer 2023-07-09 11:31:02 +02:00
Blaz Kristan
2ad3ab7f0d Correct scaling for peek. 2023-07-06 22:48:13 +02:00
Blaz Kristan
f437fd6cd6 Code readability.
Fix for peek.
Loop timing.
2023-07-06 21:16:29 +02:00
Frank
42b247756a blur speedup
it seems that SEGMENT.blur() is the main bottleneck for many 2D effects.

This change optimizes performance of the function:
* avoid to re-write unchanged pixels
* early exit when blur_amount == 0 (=nothing to do)
* use _fast_ types where possible

I've seen up to 20% speedup with this change.
2023-07-06 19:51:37 +02:00
Frank
fbbf2d5eb3 2DPlasmaball - optimize out float 2023-07-06 19:07:09 +02:00
Frank
788a276616 fix power calculation for NeoPixelBusLg
power estimation results from estimateCurrentAndLimitBri() were too low (example: estimated 1.3Amp, measured 1.6Amp). This change corrects the power calculation. Due to the changed behavior of getPixelColor, powerSum must be used as-is, not scaled down again by brightness.
2023-07-06 19:06:31 +02:00
Frank
196779ffb6
XY: minor bugfix
properly handle width=0 OR height=0
2023-07-06 09:54:12 +02:00
Blaz Kristan
59a144baed Disable global buffer on ESP8266 by default
Remove global dependency from Bus class and subclasses
Remove timings
2023-07-05 23:57:46 +02:00
Blaz Kristan
ad825b80b0 Added a few debug timings. 2023-07-05 17:16:54 +02:00
Frank
45a0061660
reverting _restaurationBri change
see previous discussion
2023-07-05 14:26:09 +02:00
Frank
8831c76fb4 restoreColorLossy small optimization
minor optimizations that give up to 10% speedup in my tests
* use "fast" integer types (where possible)
* replaced _bri with _restaurationBri (no use of globals)
2023-07-04 16:22:19 +02:00
Blaz Kristan
66616e1cab Some timings added. 2023-07-03 21:13:01 +02:00
Frank
fa281a0df0 ABL optimization
this optimization avoids to apply brightness two times .

NeoPixelBusLg has already applied global brightness at sPC. Due to internal working of the Lg bus, its sufficient to only post-apply scaling, and set the new (scaled) brightness for the next frame.
2023-07-03 19:23:57 +02:00
Frank
d48a96599f prevent races on leds buffer (looptask vs. async_tcp)
I still see strange crashes in setPixelColor/GetpixelColor, which ssem to come from race conditions between async_tcp (change presets) and looptask (strip.service).
To make the situation better, its important that any global pointers are reset to NULL immediately after free().
2023-07-03 19:15:50 +02:00
Frank
7de7ef8e8c fix some crashes when changing presets
This fixes some of the crashes I had when changing presets.

still not a full solution ...
2023-07-03 17:00:43 +02:00
Frank
406a254523 inactive segments robustness improvement
* Avoid uint16 underflow in width() and height(): stop > start is possible, and means "inactive segment".

Without these checks, it was possible that width() and height() produce VERY large values due to underflow.
2023-07-03 15:43:47 +02:00
Frank
eabd6f60ef soudsim bugfix
FFT_MajorPeak was just going from 0..255.
Now it simulates the full range from 21hz ... 8Khz
2023-07-03 15:07:14 +02:00
Frank
e416d06aa9
Merge pull request #3274 from Aircoookie/ABL_hotfixPlus
some optimizations for ABL hotfix
2023-07-03 14:36:46 +02:00
Frank
65e073e6b8 de-optimization
first version still cased some flickering.
This de-optimization makes LEDs more stable.
2023-07-03 14:01:45 +02:00
Frank
45ac0d5dc6 fix for #3276
due to `if (strip.isUpdating()) return;` reading the encoder did not happen in time if the strip was active - with high number of LEDs, this means "always updating". Similar observation that we had with the audioreactive usermod, and similar solution.
2023-07-02 19:14:32 +02:00
Blaz Kristan
c9ef034ab8 Build bump/fix 2023-07-02 13:43:29 +02:00
Titanium177
c89f38f4f8
Edited Metadata for effect 5 & 8 to be availible on just 1 Pixel (PWM) (#3275) 2023-07-01 23:18:02 +02:00
Blaz Kristan
858b57d77a Return of local leds[] 2023-07-01 21:48:30 +02:00
Frank
9b87892036 optimization for ABL hotfix
* adding an optional parameter to setBrightness(). ApplyPostAdjustments() will only be called if `immediate=true`. Only ABL will use immediate=true, to ensure electrical safety of equipment.

This allows some optimizations of performance, as ApplyPostAdjustments() is time consuming.

* busses.setBrightness(bri) --> applied to all future pixels (fast, lossless)
* busses.setBrightness(bri, true) --> applied directly to all previously set pixels (slower, lossy)
2023-07-01 20:09:52 +02:00